Channel Transpose; Set Up - Yamaha Clavinova CVP-900 Owner's Manual

Recording Your Performances and Creating Songs— Song Creator

Channel Transpose

This allows you to transpose the recorded data of individual channels up or down by a maximum of two octaves in
semitone increments.
Use these to select the
desired edit operation.
Executes the Channel
Transpose operation. After
the operation is completed,
this button changes to
[UNDO], letting you restore
the original data if you're not
satisfied with the Channel
Transpose results. The
Undo function only has one
level; only the previous
operation can be undone.

Set Up

You can change the initial settings of the song — such as voice, level, and tempo — to the current settings of the mixing
console or panel controls.
Use these to select the
desired edit operation.
Executes the SET
UP operation. Once
SET UP has been
executed, the
operation cannot be
cancelled or undone.
106
CVP-900
A
B
C
D
E
1 2
Determines the amount of transpose for each channel.
A
B
C
D
E
1 2
Determines which playback features and functions will be automatically called up along with the selected song. All
events, with the exception of "KEYBOARD VOICE," can be recorded only at the beginning of the song.
Before you select or checkmark any of these items (other than Keyboard Voice), make sure to return the song to the
beginning by using the [TOP] button, and stop playback.
Song.............................Stores the tempo setting and all settings made from the Mixing Console.
Keyboard Voice ...........This lets you automatically set the voice of the keyboard-played parts (Main/Layer/Left)
when playing back the song. Stores the keyboard-played voice and the part ON/OFF
settings. To record a voice change for the keyboard-played part in the middle of a song, stop
the song at the desired point, make the voice change, and press the [D] (EXECUTE) button.
Lyrics Bkgd/Lng..........Stores the settings of the Lyrics display.
Score Setting ..............Stores the settings of the Score display.
Mic. Setting..................Stores the microphone settings in the mixing console.
Guide Setting ..............Stores the settings of the practice functions. When the settings are stored, selecting a song
automatically turns on the Guide functions.
3 4 5 6 7 8
3 4 5 6 7 8
Toggles between the two
channel displays: Channels
1 - 8, and Channels 9 - 16.
F
To simultaneously set all
G
channels to the same value,
H
adjust the Channel Transpose
for one of the channels while
I
holding down this button.
J
Calls up the SONG display,
from which you can save
the edited data.
F
G
H
Calls up the SONG display,
I
from which you can save
J
the edited data.
Use this to checkmark the
selected item.
Checkmarked items are
stored with the song.