Using The Shift-Related Functions - Yamaha CBX-K1 Owner's Manual

Using the CBX-K1 — Basic Operations
The enormous flexibility and power of the CBX-K1 is in its
"hidden" or SHIFT-related functions — allowing you to
send virtually any kind of MIDI message directly from the
keyboard or use the ASSIGNABLE Wheel for real-time
control change.
Many of the functions can be done with one or two key-
strokes, while others require you to enter a number value
and press one of the L keys to execute the function.
All functions can be accessed or executed by using one of
the operations described below.
The MIDI functions can be generally divided into three
types, according to their operation.
1) Holding C and pressing the function's key. For
these functions, such as Sequencer Stop and Start,
pressing L is not necessary. These functions are
shown on the panel without underline.
Functions Assigned to the Keyboard
12

Using the SHIFT-Related Functions

L
Panel Name Group A Function
STOP Stop
CONTINUE Continue
START Start
TEMPO Tempo
BANK SELECT Bank Select
PROGRAM CHANGE Program Change
GM ON GM On
SOUND OFF All Sound Off (each channel)
XG ON XG On
MERGE ON/OFF Merge On/Off (each channel)
MIDI CH MIDI Channel
FIXED VELOCITY Fixed Velocity
RPN Wheel Assign (RPN)
CONTROLLER Wheel Assign (controller number on panel)
NRPN Wheel Assign (NRPN)
DRUM NUMBER Drum Number
TRANSPOSE Q Transpose Down
TRANSPOSE W Transpose Up
Holding C, pressing the function's key and then
2)
L. These functions are indicated with a dashed
underline on the panel (for example, GM ON and XG
ON) and require pressing L to execute.
Holding C, pressing the function's key, entering
3)
a value and then pressing L. These functions
are indicated with an underline on the panel (for ex-
ample, PROGRAM CHANGE and TEMPO), and
require that a value (Decimal or Hexadecimal) be
entered.
In using the SHIFT-related functions, re-
member:
Keep holding down C until the end of the
operation. If C is released in mid-operation,
you'll have to start the operation all over again.
In the instructions that follow, "L" refers to either of
the ENTER keys, J or K.
In other words, this means that either key can be used,
unless indicated otherwise.
NOTE The V / B lamps flash briefly
when a function is executed or a message is sent.
Group B Function
Song Select
Song Position Pointer
Reset All Controllers
—
—
—
—
All Sound Off (all channels)
GM-B Reset
—
Merge On/Off (each channel)
Touch Sensitivity
Controller Direct Data Send (RPN)
Controller Direct Data Send (controller number on panel)
Controller Direct Data Send (NRPN)
Device Number
Wheel Invert
MSB/LSB Invert