Yamaha PORTATONE PSR-S500 Owner's Manual page 35

2
Select the recording part for each track (Part Assign).
◆ Selecting the part for the Melody track (tracks 1–8)
While holding down the [REC] button, press one of the track buttons
[1]–[8] until the desired part is shown at the track button. Each time you
press the button, the part is changed in order (such as MAIN, DUAL,
LEFT) in the Main display.
Press and hold
◆ Selecting the part for the Accompaniment track
While holding down the [REC] button, press the [ACMP] button. The
REC indication will be highlighted in the display and operation will be
set to record ready mode.
Press and hold
Track 1 is MAIN part.
ACMP is set to record ready mode.
Recording Your Own Performance
CAUTION
• If you record your perfor-
mance to a track that con-
tains previous data, the
previous data will be overwrit-
ten by the new data.
NOTE
• When ACMP track is set to REC
ON, the accompaniment will be
automatically set to ON.
• When press the [REC] button
during accompaniment on, the
ACMP track will be automati-
cally set to REC ON.
• ACMP ON/OFF does not
change while recording is in
progress.
• An assigned part cannot be
specified to another track.
• A maximum of three melody
tracks can be recorded simulta-
neously.
NOTE
• If you want to cancel the record
ready mode of a track, simulta-
neously hold down the [REC]
button and press again the track
button you want to cancel.
PSR-S500 Owner's Manual
35