Automatic Cd Edit Recording For The Kx-M5 - Yamaha CRX-M5 Owner's Manual

RECORDING USING THE MDX-M5 OR KX-M5
Automatic CD edit
recording on the KX-M5
By specifying the total possible recording time of the
tape, the unit programs tracks or helps you to program
tracks so they will fit onto the tape with the least
amount of unrecorded space remaining at each end of
the tape.
POWER CT TIMER CLOCK
/
RDS PTY RT
TIME REP EDIT
FM/AM ST/MONO DISC
1 2
MEMORY PRESET
PGM
TUNER CD
1 2 3 4
6 7 8 9
REC/ REC/ CD
PAUSE MUTE SYNC
/
TAPE
MD
INPUT SLEEP MUTE VOLUME
–
1
Insert the desired disc into the unit, and load a
blank tape into the KX-M5.
2
Press DISC 1 – 3 to select the desired CD, then
press 7 after playing for several seconds.
3
Set the KX-M5 to forward direct and reverse mode
(see instruction of the KX-M5).
4
Press EDIT.
"C–46" appears in the display.
5
Press EDIT repeatedly to select the length of tape
to be used.
Each time you press EDIT, the length of tape
changes as follows:
C-46 C-50 C-54
C-120 C-100
E-24
SET
TUNING
EDIT
DISC 1 – 3
3
7
/
4/¢
5
0
+10
CD SYNC
+
C-60 C-74
C-90
6
The unit starts programming.
REMAIN
1
2 PROGRAM
EDIT A
3
TRACK
The track number
to be recorded last
on side A
1 REMAIN
2 PROGRAM
3 EDIT B
TRACK
The track number
to be recorded last
on side B
1 TOTAL
2 PROGRAM
EDIT
3
TRACK
The track number
to be recorded last
on side B
1
2 PROGRAM
EDIT
3
TRACK
The unit and the tape deck are ready for
recording.
7
Press CD SYNC.
The recording unit appears.
8 Press 4/¢ repeatedly to select "CD
9
Press CD SYNC.
The unit starts play the CD and the KX-M5 starts
recording automatically.
10
Each unit stops automatically when the recording is
finished.
Note
• If you select "CD MD" in step 8 above, you can record to
the MDX-M5 also.
After 3 seconds
Remaining time of side A
After 3 seconds
Remaining time of side B
After 3 seconds
Total recording time
After 3 seconds
TAPE"