Using The Built-In Timer; Before Using The Timer; Timer Play - Yamaha CRX-M5 Owner's Manual

USING THE BUILT-IN TIMER

Before using the timer

1
Make sure the clock of the unit is correct (for
setting the clock, see page 7).
2
If you want to use the MDX-M5 or KX-M5 for timer
play, you must first make the connections as
shown in "Connecting other components" on page
5. For details, refer to the instructions supplied with
the MDX-M5 or KX-M5.

Timer play

By using the built-in timer, you can have the unit turn
on at a specified time and begin play of a tape, CD, or
radio automatically. You can also specify the turn off
time.
POWER CT TIMER CLOCK
/
RDS PTY RT TUNING
TIME REP EDIT
FM/AM ST/MONO DISC
1 2
MEMORY
PRESET
PGM
TUNER CD
1 2 3 4
6 7 8 9
REC/ REC/ CD
PAUSE MUTE SYNC
/
TAPE
MD
INPUT SLEEP MUTE VOLUME
–
E-18
POWER
TIMER
SET
SET
3
TUNING //?
/
5
0
+10
+
1
Prepare the source to be played.
For tuner
Tune in to the station you will listen to.
For CD player
Insert the desired disc into the unit. If more than
one disc is inserted into the unit, select the disc by
pressing DISC SELECT.
For the MDX-M5 or KX-M5
Insert the desired MD or tape into the selected
unit. For details, refer to the instructions supplied
with the MDX-M5 or KX-M5.
2
Press and hold TIMER for more than 2 seconds.
3
Set the time to start play.
Press TUNING //? repeatedly to select the hour,
then press SET.
4
Press TUNING //? repeatedly to select the
minute, then press SET.
5
Set the hour and minute to stop play in the same
way as shown above if needed.
TIMER
TIMER
TIMER
TIMER