Fax Card - Xerox WORKCENTRE 7755 Information Manual

XEROX WorkCentre 7755/7765/7775 Information Assurance Disclosure Paper
features. An Image Overwrite Security kit is available which enables both Immediate and On-Demand overwrite of
any temporary image data created on the NC disk. The Network Controller also incorporates an open-source web
server (Apache) that exports a Web User Interface (WebUI) through which users can submit jobs and check job
and machine status, and through which System Administrators can remotely administer the machine. The
Network Controller is sometimes referred to as the Electronic Subsystem (ESS).
The Network Controller (NC) runs Wind River Linux, kernel v. 2.6.20+. (Note: Consistent with Flaw Remediation, this
baseline may be updated as indicated by the '+' sign. Unnecessary services such as rsh, telnet and finger are
disabled in the OS. FTP is used in client-only mode by the optional Network Scanning feature for the filing of
scanned images and the retrieval of Scan Templates; however the NC does not contain an FTP server.

2.3. Fax Card

2.3.1. Purpose
The embedded FAX service uses the installed embedded fax card to send and receive images over the telephone
interface. The FAX card plugs into a PCI slot on the copy controller.
2.3.2. Hardware
The Fax Card is a printed wiring board assembly containing processor, memory, and fax modem. It connects to the
CC via PCI bus. The Fax Card is responsible for implementing the T.30 fax protocol and for managing all of the fax-
specific features of the product. The fax telephone lines are connected directly to the Fax Card via RJ-11 connectors.
Name
Processor
SDRAM
Flash ROM
Flash
NVRAM
MODEM #1
MODEM #2
2.4. Scanner
2.4.1. Purpose
The purpose of the scanner is to provide mechanical transport of hardcopy originals and to convert hardcopy
originals to electronic data.
2.4.2. Hardware
The scanner converts the image from hardcopy to electronic data. An optional document handler moves originals
into a position to be scanned. The scanner provides enough image processing for signal conditioning and
formatting. The scanner does not store scanned images. All other image processing functions are in the copy
controller.
The scanner has 1MB of non-volatile executable code and 128KB of scratchpad RAM.
Ver. 1.01, April 2010
Size
NA Motorola Coldfire MCF5307-90MHz Processor
128 Scratch pad RAM for executing code. No user image data is stored
MB in this memory. This memory is initialized to a known state on every
power up.
32 MB Contains the executable code.
64 MB User document Image data are stored in this non-volatile memory.
to 256 Destination phone numbers are also stored here. Received jobs can
MB be stored in user mailboxes. Send jobs may be held for delayed
send.
NA Conexant FM336 Fax modem
NA Requires installation of extended card with additional FM336
Table 2-7 Fax Card Hardware Components
Purpose / Explanation
9
Page 9 of 40