Number Of Copies; Using Special Copy Features - Xerox WorkCentre PE16 User Manual

4.8
C
OPYING

Number of Copies

Using the No. of Copies button, you can select the number of
copies from 1 to 99.
1
Press No. of Copies.
2 Press the scroll button ( ¦ or ‹ ) until the number you want
appears on the display.
Pressing and holding the button allows you to quickly scroll
to the number you want.
you can enter the value using the number keypad.
3
Press Enter to save the selection.

Using Special Copy Features

You can use the following copy features using the Special
button on the control panel:
• Auto Fit : A utomatically reduces or enlarges the original
image to fit on the paper currently loaded in the machine.
See below.
• Clone : Prints multiple image copies from the original
document on a single page. The number of images is
automatically determined by the original image and paper
size. See page 4.9.
• Collation : Sorts the copy job. For example, if you make 2
copies of 3 page documents, one complete 3 page document
will print followed by the second complete document. See
page 4.10.
• 2-Side : Prints 2-sided original document on one sheet of
paper. See page 4.11.
• 2 / 4-Up : Prints 2/4 original images reduced to fit onto one
sheet of paper. See page 4.12.
• Poster : Prints an image onto 9 sheets of paper (3x3). You
can paste the printed pages together to make one poster-
size document. See page 4.12.
N
: Some features may not be available depending on where
OTE
you loaded the document, on the document glass or in the
Automatic Document Feeder.