Setting The Dial Mode; Using The Toll Save Mode - Xerox WorkCentre PE16 User Manual

1.10
G S
ETTING TARTED

Setting the Dial Mode

You can select the type of the telephone dial system where your
machine is connected.
N : The Dial Mode setting may be unavailable depending on
OTE
your country.
1
Press Menu until "Machine Setup" appears on the top line
of the display.
2 Press the scroll button ( ¦ or ‹ ) until you see "Dial Mode"
on the bottom line and press Enter.
3 Press the scroll button ( ¦ or ‹ ) to select the desired dial
mode.
Select "Tone" if your machine is connected to a tone dial
line.
Select "Pulse" if the machine is connected to a pulse dial
line.
4
Press Enter to save the selection.
To return to Standby Mode, press Stop/Clear.

Using the Toll Save Mode

Using the Toll Save button on the control panel, you can quickly
set your machine to send the document(s) stored in the memory
during the preset time slot, when the call charge is lowered. This
Toll Save mode helps you to take advantage of lower long
distance rates at night, for example.
N
: The toll-saving time slot may vary depending on your
OTE
contract with a long distance phone company.