Xerox WorkCentre M15 User Manual

Xerox WorkCentre M15 User Manual

Xerox user guide workcentre m15, m15i
Hide thumbs Also See for WorkCentre M15:
Table of Contents

Advertisement

WorkCentre M15/M15i

User Guide

604P13220

Advertisement

Table of Contents
loading

Summary of Contents for Xerox WorkCentre M15

  • Page 1: User Guide

    WorkCentre M15/M15i User Guide 604P13220...
  • Page 2 , The Document Company , the digital X and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Product names and trademarks of other companies are hereby acknowledged. Changes, technical inaccuracies and typographical errors will be corrected in subsequent editions.
  • Page 3: Table Of Contents

    Making Connections... 2-4 Installing Drum and Toner Cartridges ... 2-6 Loading Paper... 2-8 Setting the Language (M15 only) ... 2-11 Setting the Language and Country (M15i only) ... 2-12 Setting the Local ID and Name (M15i Only)... 2-13 Setting the Date and Time (M15i Only) ... 2-15 Installing Software...
  • Page 4 9 Machine Administration ...9-1 Setup Overview... 9-2 System Data Settings ... 9-3 Setting the Language (M15 only) ... 9-7 Setting the Language and Country (M15i only) ... 9-8 Setting the Local ID and Name (M15i Only)... 9-9 Setting the Date and Time (M15i Only) ... 9-11 System Setup Options ...
  • Page 5 Resetting the Machine... 11-21 12 Specifications ...12-1 Introduction... 12-2 Printer Specifications... 12-3 Fax Specifications ... 12-4 Scanner and Copier Specifications ... 12-5 General Specifications ... 12-6 Media Specifications ... 12-7 13 Index ...1 Xerox WorkCentre M15/M15i User Guide Page iii...
  • Page 6 Page iv Xerox WorkCentre M15/M15i User Guide...
  • Page 7: Welcome

    Regulatory Information ..... 1-9 Ø Environmental Compliance ....1-18 Ø Xerox WorkCentre M15/M15i User Guide Page 1-1...
  • Page 8: Introduction

    Document Feeder (ADF). WorkCentre M15i: A copier, printer, fax and scanner with an Automatic Document Feeder (ADF). The WorkCentre M15/M15i has been designed for ease of use, but to use the machine to its For instructions on unpacking and fullest potential take some time to read the User Guide.
  • Page 9: About This Guide

    Ø Document is synonymous with original. Ø Page is synonymous with sheet. Ø WorkCentre M15/M15i is synonymous with the machine. Ø The following table offers further information about the conventions used within this Guide. CONVENTION Italic Typeface Used to emphasise a word or phrase. In addition, references to other publications are displayed in Italic typeface.
  • Page 10: Related Information Sources

    Related Information Sources Information available for the WorkCentre M15/M15i consists of: - This User Guide - The Quick Start Guide - The Installation Sheet Page 1-4 Xerox WorkCentre M15/M15i User Guide...
  • Page 11: Customer Support

    Customer Support If assistance is required please call our experts at the Xerox Welcome Center, or contact the local representative. When telephoning please quote the machine serial number. Use the space below to make a note of the machine serial number:...
  • Page 12: Safety

    Safety Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These include Safety Agency approval, and compliance to established environmental standards. Please read the following instructions carefully before operating the product and refer to them as needed to ensure the continued safe operation of your product.
  • Page 13 Do not put your hands into the fuser area, located just inside the exit tray area, as you may be burned. Quality Standards: The product is manufactured under a registered ISO9002 Quality system. If you need additional safety information concerning this XEROX product or XEROX supplied materials you may call the following number: EUROPE +44 (0) 1707 353434...
  • Page 14: Safety Standards

    Safety Standards EUROPE This XEROX product is certified by the following Agency using the Safety Standards listed. Agency: TUV Rheinland Standard: IEC60950 3rd Edition Amendments A1, A2, A3, A4 and A11. USA/CANADA This XEROX product is certified by the following Agency using the Safety Standards listed.
  • Page 15: Regulatory Information

    Regulatory Information The CE marking applied to this product symbolizes Xerox Limited Declaration of Conformity with the following applicable Directives of the European Union as of the dates indicated: January 1, 1995: Council Directive 73/23/EEC amended by Council Directive 93/68/EEC, approximation of the laws of the member states related to low voltage equipment.
  • Page 16: Laser Safety

    Reference CFR Changes or modifications to this equipment not specifically approved by the XEROX 47 Part 15 Corporation may void the user's authority to operate this equipment.
  • Page 17 Xerox equipment which has been properly and regularly serviced and maintained should not have to undergo additional specific safety tests pursuant to the 1989 Regulation. Customers wishing to complete safety testing should contact Xerox Limited (see page 1-13 for details) for advice prior to any test implementation.
  • Page 18 This will include ensuring XEROX equipment in such premises is safe. XEROX Limited’s Product Safety function has prepared a guide which contains a list of tests which may be completed by your XEROX Limited Customer Service Organization.
  • Page 19 In the event of any defect being noted, the XEROX equipment will be switched off and disconnected from the supply until the defect has been corrected. You will be advised of such action to enable such defects to be corrected.
  • Page 20: Regulations - Europe

    Denmark France Italy In the event of problems, you should contact your local Xerox representative in the first instance. This product has been tested to and is compliant with TBR21, a technical specification for terminal equipment for use on analogue-switched telephone networks in the European Economic Area.
  • Page 21: Regulations - Usa

    WARNING: Ask your local Telephone Company for the modular jack type installed on your line. Connecting this machine to an unauthorized jack can damage Telephone Company equipment. You, not Xerox, assume all responsibility and/or liability for any damage caused by the connection of this machine to an unauthorized jack.
  • Page 22 Telephone Company may request that you disconnect the equipment until the problem is resolved. Repairs to the machine should be made only by a Xerox representative or an authorized Xerox service agency. This applies at any time during or after the service warranty period. If unauthorized repair is performed, the remainder of the warranty period is null and void.
  • Page 23: Regulations - Canada

    This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority or electrician, as appropriate. Xerox WorkCentre M15/M15i User Guide Page 1-17...
  • Page 24: Environmental Compliance

    Environmental Compliance ® Energy Star XEROX Corporation designed this product to comply with the guidelines of the ENERGY ® STAR program of the Environmental Protection Agency. As an ENERGY STAR XEROX has determined that this product meets the ENERGY STAR efficiency.
  • Page 25: Getting Started

    Loading Paper ......2-8 Ø Setting the Language (M15 only) ... . 2-11 Ø...
  • Page 26: Unpacking

    Pull the Scan Unlock Switch Ø located on the bottom of the scanner module to unlock the scanner. Pull open the paper cassette and Ø remove the packing material. Page 2-2 Tape Scanner Module Xerox WorkCentre M15/M15i User Guide...
  • Page 27 Ensure the following Ø components are available: AC Power Cord USB Cable Telephone Line Cord Software User Documentation Starter Toner Cartridge Drum Cartridge Xerox WorkCentre M15/M15i User Guide Page 2-3...
  • Page 28: Making Connections

    Connect the Automatic Document Ø Feeder Cable to the port shown and fasten the side screws. NOTE:The ADF is an option on the M15 Telephone Line (M15i Only) Connect the Telephone Line Cord Ø from the wall jack to the LINE jack.
  • Page 29 Press the ON/OFF switch to the Ø power cord. For ON ( I ) position. details refer to “Unpacking” on The machine displays page 2-2. ’WARMING UP PLEASE WAIT...’ Xerox WorkCentre M15/M15i User Guide USB Cable IEEE1284 (Parallel Port) Cable ON/OFF Switch Page 2-5...
  • Page 30: Installing Drum And Toner Cartridges

    Open the front cover. Ø Unpack the new drum cartridge. Ø Be careful not to touch the surface of the drum. Slide the drum cartridge into the Ø slot on the right side of the opening. Page 2-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 31 Ø until it locks in place. Turn the toner locking lever Ø downwards until it locks in place. Close the front cover and the side Ø cover. The product returns to Standby mode. Xerox WorkCentre M15/M15i User Guide Page 2-7...
  • Page 32: Loading Paper

    Loading Paper Pull open the paper cassette. Ø Push down on the pressure plate Ø until it locks into position. Page 2-8 Xerox WorkCentre M15/M15i User Guide...
  • Page 33 Fan the paper and insert it into Ø the cassette. Ensure that the paper is Ø positioned under the snubber. Do not fill above the Maximum Fill Line. Xerox WorkCentre M15/M15i User Guide Rear Guide Max Fill Line Snubber Page 2-9...
  • Page 34 Do not allow the guide to press against the edge of the paper tightly. Close the paper cassette. Ø Page 2-10 Xerox WorkCentre M15/M15i User Guide...
  • Page 35: Setting The Language (M15 Only)

    Setting the Language (M15 only) Press [Menu/Exit], the first menu Ø displays. Scroll to ’SELECT LANGUAGE’ Ø using the Using the Ø keys select the language required. Press [Enter]. Ø Xerox WorkCentre M15/M15i User Guide key. navigation WorkCentre M15 SYSTEM DATA [PAPER SIZE...]...
  • Page 36: Setting The Language And Country (M15I Only)

    Press [Enter]. key. navigation navigation keys, WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM SETUP [RECEIVE MODE...] WorkCentre M15i SELECT LANGUAGE [ENGLISH] WorkCentre M15i SELECT COUNTRY? 1: YES 2: NO WorkCentre M15i SELECT COUNTRY Xerox WorkCentre M15/M15i User Guide...
  • Page 37: Setting The Local Id And Name (M15I Only)

    Refer to “Using correct number. Characters” on page 3-11 for Press [Enter] when the correct Ø more information. telephone number displays. Xerox WorkCentre M15/M15i User Guide WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM ID [TELEPHONE...] WorkCentre M15i FAX:...
  • Page 38: Editing Numbers Or Names

    T > U > V > 8 W > X > Y > Z > 9 + > - > , > . > ‘ > / > * > # > & > 0 WorkCentre M15i Xerox WorkCentre M15/M15i User Guide...
  • Page 39: Setting The Date And Time (M15I Only)

    Press [Enter] when the correct Ø proceed. date and time displays. Press [Menu/Exit] to save and Ø exit. Xerox WorkCentre M15/M15i User Guide key. 01 ~ 31 01 ~ 12 00 ~ 99 00 ~ 23 (24-hour mode) 01 ~ 12 (12-hour mode)
  • Page 40: Installing Software

    Installing Software Installing the drivers and other software will enable PC printing. Ensure the WorkCentre M15/ M15i is plugged in and connected to the computer’s parallel or USB port before installing software from the CD. Windows 95 and Windows NT 4.0 do not support USB connection.
  • Page 41: Product Overview

    Overview of Modes ..... . . 3-10 Ø Using Characters......3-11 Ø Xerox WorkCentre M15/M15i User Guide Page 3-1...
  • Page 42: Overview Of Features

    This product complies with a variety of international standards for environmental protection and is compatible with most recycled paper. Print Documents from a PC The WorkCentre M15/M15i can be connected to a PC for printing. Print drivers are provided and enable the following functions: Image Quality adjustments Ø...
  • Page 43 There are also a number of fax reports available which provide users with information about items such as scheduled jobs, stored fax numbers and transmissions. Xerox WorkCentre M15/M15i User Guide Page 3-3...
  • Page 44: Machine Overview

    This configuration has copying and printing capabilities. A Document Cover is supplied as standard and an Automatic Document Feeder (ADF) can be purchased as an option. Xerox WorkCentre M15i - Copier, Printer, Fax and Scanner This configuration has copying, printing, faxing and scanning capabilities. An Automatic Document Feeder (ADF) is supplied as standard for this configuration.
  • Page 45: Front View

    Components Front View: Automatic Document Feeder Control Panel Scanner Paper Module Cassette NOTE: This picture represents a WorkCentre M15i. Xerox WorkCentre M15/M15i User Guide Document Guides Document Input Tray Document Collate Tray Release Latch Front Cover Paper Guides Bypass Tray...
  • Page 46: Rear View

    Cover ADF Connector USB Connector Document Glass Telephone Connections Output EXT. Tray LINE Paper Cassette AC Power Cord Paper Exit Extension Connector Parallel Connector On/Off Switch NOTE: This picture represents a WorkCentre M15i. Page 3-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 47: Control Panel Overview

    Control Panel Overview WorkCentre M15i Pause PC Copy/Fax/Scan Printing Feature Keys Navigation Keys ITEM Feature Keys Xerox WorkCentre M15/M15i User Guide Liquid Crystal Job Status Menu/Exit Display (LCD) Error Enter Redial/ Display Pause DESCRIPTION Reports Use to display the menu map and a list of available reports for printing.
  • Page 48: Copy

    Page 3-8 DESCRIPTION Resolution Use to adjust the resolution or sharpness of the image. Scan Options Use to select COLOR, B&W or GRAY mode for scanning. In Fax mode, B&W or COLOR mode is available. Xerox WorkCentre M15/M15i User Guide...
  • Page 49 PC. Clear/Clear All Use to clear the copy quantity when entering a number, or clear the currently selected feature setting. Illuminates when a system error occurs. Xerox WorkCentre M15/M15i User Guide Liquid Crystal Menu/Exit Display (LCD) Error...
  • Page 50: Overview Of Modes

    When the machine is in Scan mode the standby screen displays Status Page 3-10 WorkCentre M15 READY TO COPY 100% WorkCentre M15i 11 - DEC - 2002 100% 15:11 WorkCentre M15i READY TO SCAN Number of Copies Memory % Available Mode Selected Xerox WorkCentre M15/M15i User Guide...
  • Page 51: Using Characters

    The cursor moves to the right and the next letter appears in the display. When all the letters have been Ø entered, press [Enter]. Xerox WorkCentre M15/M15i User Guide , then press the Numeric Keypad Enter Page 3-11...
  • Page 52: Keypad Character Assignment

    T > U > V > 8 W > X > Y > Z > 9 + > - > , > . > ‘ > / > * > # > & > 0 Xerox WorkCentre M15/M15i User Guide...
  • Page 53: Copy

    Ø Copy Features ......4-6 Ø Xerox WorkCentre M15/M15i User Guide Page 4-1...
  • Page 54: Copying Procedure

    When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not reproduce correctly, even when Auto Fit is selected. Page 4-2 Enter Key Copy/Fax/Scan Key Enter Key Paper Supply Key Xerox WorkCentre M15/M15i User Guide...
  • Page 55: Load The Originals

    ADF. Align with the registration arrow in the rear left corner. Lower the ADF or cover. Ø Xerox WorkCentre M15/M15i User Guide (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m Page 4-3...
  • Page 56: Select The Copy Features

    Ø copy quantity is the number of copies required. 999. If necessary, press [Clear/Clear Ø All] to clear the current quantity and enter a new quantity. Page 4-4 Copy Features Numeric Keypad Clear/Clear All Key Xerox WorkCentre M15/M15i User Guide...
  • Page 57: Press Start

    When all the originals have been Ø scanned, use the select [NO] and press [Enter]. Printing commences and copies are delivered to the Output Tray. Xerox WorkCentre M15/M15i User Guide Navigation Keys key to Start Key Page 4-5...
  • Page 58: Copy Features

    Press [Paper Supply] repeatedly until the required Ø setting displays. Press [Enter] to save the selection. Ø If using the Bypass Tray, select the type of paper Ø being loaded and press [Enter]. TO SELECT Xerox WorkCentre M15/M15i User Guide...
  • Page 59 Auto Fit Use to reduce or enlarge the image to fit the paper size automatically. Xerox WorkCentre M15/M15i User Guide Press [Lighten/Darken] repeatedly until ’MANUAL’ Ø displays and press [Enter]. Each time the key is pressed the selection block Ø...
  • Page 60 Glass. Scan side 1 and when prompted, turn over the original and select [YES] to scan side 2. Repeat the procedure until all originals have been scanned. Then use the and press [Enter]. key to select [NO] Xerox WorkCentre M15/M15i User Guide...
  • Page 61 Use the following instructions to return the Copy feature selections back to the default settings: Press [Clear/Clear All] twice. Ø When the machine has reset the Ø Copy features, ’READY TO COPY’ displays. Xerox WorkCentre M15/M15i User Guide WorkCentre M15 READY TO COPY 100% Page 4-9...
  • Page 62 Page 4-10 Xerox WorkCentre M15/M15i User Guide...
  • Page 63: Paper And Other Media

    Loading Paper ......5-2 Ø Media Specifications ..... . . 5-8 Ø Xerox WorkCentre M15/M15i User Guide Page 5-1...
  • Page 64: Loading Paper

    Using the Paper Cassette Loading the Paper Cassette Using the instructions provided, load paper into the WorkCentre M15/M15i. The paper cassette can hold a maximum of 550 sheets of 80 g/m When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not reproduce correctly, even when Auto Fit is selected.
  • Page 65 The paper cassette can hold a maximum of 550 sheets of 80 g/m (20 lb) plain paper. Fan the paper and insert it into Ø the cassette. Xerox WorkCentre M15/M15i User Guide Rear Guide Page 5-3...
  • Page 66 Do not allow the guide to press against the edge of the paper tightly. Close the paper cassette. Ø Page 5-4 Max Fill Line Snubber Xerox WorkCentre M15/M15i User Guide...
  • Page 67: Using The Bypass Tray

    Label Cardstock The height is measured with the stack of sheets laid, without being touched by hands, on a flat surface. Xerox WorkCentre M15/M15i User Guide PAPER TYPE MAXIMUM STACKING HEIGHT 100 sheets or 9 mm (0.35 inch) 10 envelopes or 9 mm (035 inch) 30 sheets or 9 mm (0.35 inch)
  • Page 68: Loading The Bypass Tray

    Straighten the edges on a level surface. Hold Load the print material with the Ø transparencies by print side facing down and the edges and against the right edge of the tray. avoid touching the print side. Page 5-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 69 ‘BYPASS’ displays, then press [Enter]. Select the ’PAPER TYPE’ being Ø loaded using the navigation keys and press [Enter]. If printing, select the correct paper source from the software application. Xerox WorkCentre M15/M15i User Guide Page 5-7...
  • Page 70: Media Specifications

    Depending on paper thickness, maximum capacity may be reduced. Feed one sheet at a time through the Bypass Tray if jams occur. Page 5-8 MEDIA SIZE Plain paper Envelopes Labels Card stocks INPUT SOURCE CAPACITY Paper Cassette Bypass Tray Xerox WorkCentre M15/M15i User Guide...
  • Page 71: Media Guidelines

    Media Guidelines Always use high-quality, laser printer grade paper in the WorkCentre M15/M15i. Ø Damaged, curled, or damp paper can cause jams and image quality problems. Follow Ø these simple rules to store paper: Store paper in dry conditions, away from extreme heat or cold, such as radiators or open windows.
  • Page 72 Do not feed a sheet of labels through the product more than once. The adhesive backing Ø is designed for one pass through the product. Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or Ø otherwise damaged. Page 5-10 ° Xerox WorkCentre M15/M15i User Guide...
  • Page 73: Fax (M15I Only)

    Fax Reports ......6-24 Ø Xerox WorkCentre M15/M15i User Guide Page 6-1...
  • Page 74: Faxing Procedure

    (12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier Specifications” on page 12-5 for full ADF specifications. Page 6-2 (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m Xerox WorkCentre M15/M15i User Guide...
  • Page 75 ADF is closed. Select the Copy/Fax/Scan key Ensure ’FAX’ displays. Ø If not, press the [Copy/Fax/Scan] Ø key repeatedly until ’FAX MODE’ displays and press [Enter]. Xerox WorkCentre M15/M15i User Guide Copy/Fax/Scan Key Enter Key Page 6-3...
  • Page 76: Select The Fax Features

    Methods” on press the correct number. page 6-14. Pressing the [Clear/Clear All] key will delete the entire fax number entered. Page 6-4 Fax Features Numeric Keypad Navigation Keys Clear/Clear All Key Xerox WorkCentre M15/M15i User Guide...
  • Page 77 Select [YES] to scan another page. When all the originals have been Ø scanned, use the select [NO] and press [Enter]. Faxing commences and the fax is sent. Xerox WorkCentre M15/M15i User Guide Navigation Keys key to Start Key Page 6-5...
  • Page 78: Fax Features

    Press [Scan Options] repeatedly to scroll Use for color documents. Ø through the choices. Ensure the Resolution is set to FINE when sending When the correct setting displays, press Ø a color fax. [Enter] to save the selection. TO SELECT... Xerox WorkCentre M15/M15i User Guide...
  • Page 79 Use the following instructions to return the Fax feature selections back to the default settings: Press [Clear/Clear All] twice. Ø The LCD displays the date and time and FAX. Xerox WorkCentre M15/M15i User Guide Use for documents Press [Original Type] to display the current Ø containing mostly text.
  • Page 80: Advanced Fax Features

    The originals are scanned into memory and stored ready for transmission at the specified time. The display shows the memory % available and the number of pages scanned. Page 6-8 TO SELECT... until ’DELAY SEND’ displays, then press [Enter]. navigation keys to select [1: Xerox WorkCentre M15/M15i User Guide keys. Press [Enter] to...
  • Page 81 Press [Enter].The originals are scanned and stored in memory ready for polling. The Ø display shows the memory % available and the number of pages stored. Xerox WorkCentre M15/M15i User Guide until ’PRIORITY SEND’ displays, then press until ’POLLING’ displays, then press [Enter].
  • Page 82 If a time has been set, the machine dials the remote machine at the specified time to retrieve the document. Page 6-10 until ’POLLING’ displays, then press [Enter]. until ’DELAY RX POLL’ displays, then press [Enter]. keys. If a time is set Xerox WorkCentre M15/M15i User Guide...
  • Page 83: Fax Job Management

    The machine can be set to print a Confirmation Report automatically after each transmission, refer to page “Fax Reports” on page 6-24 for details Xerox WorkCentre M15/M15i User Guide WorkCentre M15i PRESS [STOP] TO CANCEL...
  • Page 84: Monitoring Dual Job Status

    When the machine performs dual Ø tasks, press [Job Status] to view the current status of the other operation. Each time [Job Status] is pressed, the status of the two operations displays alternately. Page 6-12 Job Status Xerox WorkCentre M15/M15i User Guide...
  • Page 85 [Enter]. If cancelling an operation a confirmation message displays. If adding to an operation the total pages scanned and the number of pages added displays. Xerox WorkCentre M15/M15i User Guide until ’ADD/ to select until the WorkCentre M15i ADD/CANCEL [OPERATION...]...
  • Page 86: Dialing Methods

    If not, press the [Copy/Fax/Scan] key until ’FAX MODE’ displays and press [Enter]. Use the Numeric Keypad to enter the telephone Ø number of the remote fax machine. Press [Start] or [Enter] to send the fax. Ø INSTRUCTIONS Xerox WorkCentre M15/M15i User Guide...
  • Page 87 1 or 2 digit Speed Dial number. Using Speed Dialing Xerox WorkCentre M15/M15i User Guide Up to 80 Ensure the LCD displays FAX. If not, press the Ø numbers can be [Copy/Fax/Scan] key until ’FAX MODE’ displays and stored in Speed press [Enter].
  • Page 88 Group and press [Enter]. If a name is not required, press [Enter]. Ø To setup another Group Dial, repeat the procedure. Ø To exit press [Menu/Exit]. until ’GROUP DIAL’ displays, then Xerox WorkCentre M15/M15i User Guide...
  • Page 89 Editing Group Dial numbers Using Group Dialing Xerox WorkCentre M15/M15i User Guide Use to add Ensure the LCD displays FAX. If not, press the Ø numbers to or [Copy/Fax/Scan] key until ’FAX MODE’ displays and delete numbers press [Enter]. from a Group Press [Menu/Exit].
  • Page 90 Press [Redial/Pause] for 2 seconds. Ø Memory. The Redial Memory in the machine retains the last 10 numbers dialled. Press Ø and press [Enter]. The originals are scanned and faxed. until the required number displays Xerox WorkCentre M15/M15i User Guide...
  • Page 91: Receiving A Fax

    FAX mode. Xerox WorkCentre M15/M15i User Guide DESCRIPTION In this mode, automatic fax answering and reception is switched off. To receive a fax manually, pick up the external phone handset or press Manual Dial to accept the call.
  • Page 92: Setting The Receive Mode

    Press [Enter] to save the setting. Ø Press [Menu/Exit] to save and Ø exit. Page 6-20 Copy/Fax/Scan Key until ’SYSTEM to select the Enter Key WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM SETUP [RECEIVE MODE...] Xerox WorkCentre M15/M15i User Guide...
  • Page 93: Secure Receive

    Press [Menu/Exit]. ’SYSTEM Ø DATA’ displays. Press Ø SETUP’ displays, then press [Enter]. Press Ø RECEIVE’ displays. Xerox WorkCentre M15/M15i User Guide Copy/Fax/Scan Key until ’SYSTEM until ’SECURE Enter Key WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM SETUP [RECEIVE MODE...]...
  • Page 94: Printing Secure Faxes

    Press [Menu/Exit]. ’SYSTEM Ø DATA’ displays. Page 6-22 to select ’ON’ and Copy/Fax/Scan Key WorkCentre M15i SECURE RECEIVE [ON...] WorkCentre M15i ENTER PASSCODE [_ _ _ _] Enter Key WorkCentre M15i SYSTEM DATA [PAPER SIZE...] Xerox WorkCentre M15/M15i User Guide...
  • Page 95 To print the received faxes press Ø press [Enter]. If required, enter the 4 digit Ø passcode and press [Enter]. The faxes are printed. Xerox WorkCentre M15/M15i User Guide until ’SYSTEM until ’SECURE to select PRINT and WorkCentre M15i SYSTEM SETUP [RECEIVE MODE...]...
  • Page 96: Fax Reports

    The select report is printed. Page 6-24 DESCRIPTION Prints the report after each transmission automatically. Prints the report only if an error occurs. No report is printed automatically. Can be printed if selected manually. WorkCentre M15i REPORTS [MSG. CONFIRM] Xerox WorkCentre M15/M15i User Guide...
  • Page 97: Print

    Printing Procedure......7-2 Ø Printing Options ......7-4 Ø Xerox WorkCentre M15/M15i User Guide Page 7-1...
  • Page 98: Printing Procedure

    Printer Driver software must be loaded on the PC to enable printing. to the documentation The WorkCentre M15/M15i should be powered on and paper loaded in one of the paper trays. provided with the software application. Create or Open the Document Open the application required for Ø...
  • Page 99: Printing Options

    “Printing Options” on page 7-4. Select OK to Print To accept the programming Ø selections and send the job to Print, select [OK]. The job is sent to the WorkCentre M15/M15i for printing. Xerox WorkCentre M15/M15i User Guide Page 7-3...
  • Page 100: Printing Options

    Printing Options The WorkCentre M15/M15i can be used with all the Windows 95/98/2000/Me/XP and Windows NT 4.0 applications. Ensure the WorkCentre 15 Series has been set as the default printer for all operations. Windows software applications allow changes to be made to the printer settings prior to printing.
  • Page 101: Accessing Printer Settings

    Select the File > Print > Properties or File > Page Setup command from within any Ø Windows application. Select the Xerox WorkCentre printer from the Printers folder, then select File > Properties Ø (or select the printer icon in the Printers folder, and click the right mouse button).
  • Page 102: Printer Properties Tabs

    Settings made when the Printer Properties are accessed through an application File menu and Print or Page Setup will remain active until the application being used is closed. Page 7-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 103: Control Options

    Cancel Apply Defaults Help Xerox WorkCentre M15/M15i User Guide DESCRIPTION Saves all the new settings and closes the driver or dialog. These new settings remain in effect until changed. Closes the dialog and returns all settings in the tabs to the values that were in place before the dialog was opened.
  • Page 104 Page 7-8 Xerox WorkCentre M15/M15i User Guide...
  • Page 105: Scan (M15I Only)

    TWAIN Scanner Program ....8-2 Ø Scanning Procedure ..... . . 8-3 Ø Xerox WorkCentre M15/M15i User Guide Page 8-1...
  • Page 106: Twain Scanner Program

    An alternative method for color scanning is to use PaperPort. PaperPort is an advanced software program that is provided with the WorkCentre M15i. This software allows users to convert scanned graphics and images into various "usable" formats. Page 8-2 Xerox WorkCentre M15/M15i User Guide...
  • Page 107: Scanning Procedure

    (12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier Specifications” on page 12-5 for full ADF specifications. Xerox WorkCentre M15/M15i User Guide (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m...
  • Page 108: Run The Scan Application Program

    When using Paperport software to scan your job, the application will create a separate file for each scanned page of the job. These separate pages can then be merged within the Paperport application. Page 8-4 Xerox WorkCentre M15/M15i User Guide...
  • Page 109: Machine Administration

    System Data Settings ..... . 9-3 Ø Setting the Language (M15 only) ... . . 9-7 Ø...
  • Page 110: Setup Overview

    Setup Overview There are various system settings which require setting up prior to using the WorkCentre M15/ M15i. The system settings are accessed via the Menu/Exit key on the Control Panel. The following menus contain settings available for customizing: System Data Ø...
  • Page 111: System Data Settings

    EXT jack. Power Save Enables reduced power usage when the machine is idle. Xerox WorkCentre M15/M15i User Guide SETTINGS Cassette Paper Paper Size options are Letter, A4, or Legal (216 x 356 mm / 8.5 x 14 inch). Bypass Paper...
  • Page 112 Redial attempts can be entered from 0 to 9. [1 - 7] Between 1 and 7 rings can be set. With this option it is not necessary to wait until documents are sent before sending or storing other fax jobs. DESCRIPTION Xerox WorkCentre M15/M15i User Guide...
  • Page 113 Clock Mode Sets the format for the clock. Xerox WorkCentre M15/M15i User Guide SETTINGS Set to ON to enable the page number and date and time of reception to be printed on each page of each received transmission.
  • Page 114: Changing The System Data Options

    Keypad to enter the setting data. Press [Enter]. Ø Press [Menu/Exit] to save and Ø exit. Page 9-6 key scroll navigation WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM DATA [MESSAGE CONF.] WorkCentre M15i MESSAGE CONF. [1: ON] Xerox WorkCentre M15/M15i User Guide...
  • Page 115: Setting The Language (M15 Only)

    Setting the Language (M15 only) Press [Menu/Exit], the first menu Ø displays. Scroll to ’SELECT LANGUAGE’ Ø using the Using the Ø keys select the language required. Press [Enter]. Ø Xerox WorkCentre M15/M15i User Guide key. navigation WorkCentre M15 SYSTEM DATA [PAPER SIZE...]...
  • Page 116: Setting The Language And Country (M15I Only)

    Press [Enter]. key. navigation navigation keys, WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM SETUP [RECEIVE MODE...] WorkCentre M15i SELECT LANGUAGE [ENGLISH] WorkCentre M15i SELECT COUNTRY? 1: YES 2: NO WorkCentre M15i SELECT COUNTRY Xerox WorkCentre M15/M15i User Guide...
  • Page 117: Setting The Local Id And Name (M15I Only)

    Refer to “Using correct number. Characters” on page 3-11 for Press [Enter] when the correct Ø more information. telephone number displays. Xerox WorkCentre M15/M15i User Guide WorkCentre M15i SYSTEM DATA [PAPER SIZE...] WorkCentre M15i SYSTEM ID [TELEPHONE...] WorkCentre M15i FAX:...
  • Page 118 T > U > V > 8 W > X > Y > Z > 9 + > - > , > . > ‘ > / > * > # > & > 0 WorkCentre M15i Xerox WorkCentre M15/M15i User Guide...
  • Page 119: Setting The Date And Time (M15I Only)

    Press [Enter] when the correct Ø proceed. date and time displays. Press [Menu/Exit] to save and Ø exit. Xerox WorkCentre M15/M15i User Guide key. 01 ~ 31 01 ~ 12 00 ~ 99 00 ~ 23 (24-hour mode) 01 ~ 12 (12-hour mode)
  • Page 120: System Setup Options

    ANS/FAX Use if attaching an answering machine to the WorkCentre M15/M15i. If the machine detects a fax tone, it switches to fax mode automatically. Use to receive all faxes into the machine’s memory. When enabling Secure Receive a secure passcode can be entered to restrict access to the faxes received.
  • Page 121 Orientation Use to set the default orientation. Xerox WorkCentre M15/M15i User Guide The speaker can be set to ON, OFF or COM. With this option set to COM, the speaker is on until the remote machine answers.
  • Page 122 Use to set the period of time before the machine returns to standby mode. Page 9-14 0, 30, 60, 120, 300 Sets the number of seconds the machine remains idle before returning to standby mode. Xerox WorkCentre M15/M15i User Guide...
  • Page 123 Ø required, use the Numeric Keypad to enter the setting data. Press [Enter]. Ø Press [Menu/Exit] to save and Ø exit. Xerox WorkCentre M15/M15i User Guide key scroll select the . navigation WorkCentre M15 SYSTEM DATA [PAPER SIZE...] WorkCentre M15 SYSTEM SETUP [RECEIVE MODE...]...
  • Page 124: Memory Clear

    Repeat the procedure to clear another item or press [Menu/Exit] or [Stop] to exit and return Ø to Standby mode. Page 9-16 until ‘MEMORY CLEAR’ appears, then press [Enter]. until the item requiring clearing displays then press [Enter] to clear the Xerox WorkCentre M15/M15i User Guide...
  • Page 125: Adjusting Speaker Volume (M15I Only)

    The display shows the current volume level. Press [Stop] to save the setting Ø and return to Standby mode. Xerox WorkCentre M15/M15i User Guide Copy/Fax/Scan Key repeatedly Enter Key WorkCentre M15i VOLUME L [ _ _ g _ _ _ _ ] H...
  • Page 126: Reports

    This report is printed automatically after sending documents to more than one location. Communication Report Power Failure This report is printed out automatically when power is restored after a power failure occurs and Report there is data loss due to the power failure. Page 9-18 Xerox WorkCentre M15/M15i User Guide...
  • Page 127: Printing Reports

    The display shows the first menu; MSG. CONFIRM. Press [Reports] repeatedly until Ø the report required for printing displays, then press [Enter]. The selected report will be printed. Xerox WorkCentre M15/M15i User Guide WorkCentre M15 REPORTS [MSG. CONFIRM] WorkCentre M15 REPORTS [MSG. CONFIRM] Page 9-19...
  • Page 128: Controlcentre 5.0

    ControlCentre 5.0 Using the Xerox WorkCentre M15/M15i ControlCentre 5.0 fax system data options can be set up, phonebook entries can be created and edited and setup information can be viewed on the After setting up fax data options or creating phonebooks, just click [Apply] on the ControlCentre 5.0 screen to download the new settings to the machine.
  • Page 129: Using Controlcentre

    NOTE: When the settings on ControlCentre 5.0 are changed, or when ControlCentre 5.0 is run, the settings on the machine and on ControlCentre 5.0 will be automatically updated to the latest settings made either on the machine or on ControlCentre 5.0. Xerox WorkCentre M15/M15i User Guide Page 9-21...
  • Page 130: Controlcentre 5.0

    Settings” on page 9-3. Reads the current settings in the WorkCentre M15/M15i machine then refreshes ControlCentre 5.0 with the machine’s current setting. Page 9-22 Downloads the settings made in ControlCentre 5.0 to the WorkCentre M15/ M15i machine. Xerox WorkCentre M15/M15i User Guide...
  • Page 131: Advanced Tab

    Advanced Tab Click on the [Advanced] tab to change the default Fax System Setup options. For details on the System Setup options, please refer to “System Setup Options” on page 9-12. Xerox WorkCentre M15/M15i User Guide Page 9-23...
  • Page 132: Phonebook Tab

    ControlCentre 5.0 to the WorkCentre M15/ M15i machine Allows a selected Phonebook entries phonebook entry to be edited in a separate Edit dialog Deletes all phonebook entries Deletes a selected phonebook entry Page 9-24 Xerox WorkCentre M15/M15i User Guide...
  • Page 133: Information Tab

    Number of scans using the Document Glass Number of prints performed by the machine Number of jams in the Xerox WorkCentre M15/M15i User Guide Number of scans using the ADF Number of prints using the drum Number of jams during printing...
  • Page 134: Firmware Update Tab

    Click on the [Firmware Update] tab to update the firmware of the machine. This feature should be used by an Xerox Service Representative. Please contact the local Xerox representative or authorized dealer for further information. Page 9-26 Xerox WorkCentre M15/M15i User Guide...
  • Page 135: 10 Maintenance

    Ordering Supplies ......10-4 Ø Customer Replaceable Units ....10-5 Ø Xerox WorkCentre M15/M15i User Guide Page 10-1...
  • Page 136: Cleaning

    Document Glass and CVT glass until they are clean and dry. Wipe the underside of the white Ø document cover until it is clean and dry. Close the ADF or document Ø cover. Page 10-2 Xerox WorkCentre M15/M15i User Guide...
  • Page 137: Control Panel And Lcd

    Control Panel and LCD screen with a soft, lint-free cloth, lightly dampened with water. Document Feeder and Collate Tray Use a cloth moistened with water to clean the Automatic Document Feeder, Collate Tray, Paper Cassette and the outside areas of the WorkCentre M15/M15i. Xerox WorkCentre M15/M15i User Guide Page 10-3...
  • Page 138: Ordering Supplies

    The Toner Cartridge and the Drum Cartridge are available as customer replaceable units. The customer replaceable unit part numbers are listed below: To obtain supplies, contact the local Xerox office, giving the company name, the product number and its serial number.
  • Page 139: Customer Replaceable Units

    Shaking the cartridge re-distributes the remaining toner in the cartridge. This procedure can only be performed once prior to changing the Toner Cartridge. Xerox WorkCentre M15/M15i User Guide until ‘SYSTEM SETUP’ appears in the display, then press [Enter]. select ‘TONER SAVE’.
  • Page 140 Pull the release latch to open the Ø side cover. Open the front cover. Ø Turn the toner locking lever Ø upwards to release the toner cartridge. Remove the toner cartridge from Ø the machine. Page 10-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 141: Replacing The Toner

    Close the front cover, then the Ø side cover. The LCD displays ’NEW Ø TONER? 1. YES 2. NO’. Using the navigation keys select ’1. YES’ and press [Enter]. The product returns to Standby mode. Xerox WorkCentre M15/M15i User Guide Page 10-7...
  • Page 142: Setting The Product To Send Toner Low Information

    Refer to “Customer Support” on page 1-5 for further information. Page 10-8 until ‘NOTIFY TONER’ displays, then press [Enter]. to turn this feature ‘ON’ or ‘OFF’, then press [Enter]. until ‘MAINTENANCE’ Xerox WorkCentre M15/M15i User Guide...
  • Page 143: Drum Cartridge

    ‘DRUM WARNING’ when the drum is near the end of life. Approximately 1,000 more copies can be made, but a replacement cartridge in should be available. Replace the drum cartridge when copy/print quality becomes degraded. Xerox WorkCentre M15/M15i User Guide until ‘MAINTENANCE’ appears, then press [Enter]. Page 10-9...
  • Page 144 Turn the toner locking lever Ø upwards to unlock the toner cartridge, then pull the toner cartridge out. The toner cartridge must be removed to replace the drum cartridge. Pull out the used drum cartridge. Ø Page 10-10 Xerox WorkCentre M15/M15i User Guide...
  • Page 145 Reinstall the toner cartridge, then Ø lock the lever. Close the front cover and the side Ø cover. Xerox WorkCentre M15/M15i User Guide Page 10-11...
  • Page 146 Page 10-12 until until ‘NEW WorkCentre M15 NEW DRUM? 1: YES 2:NO WorkCentre M15 MAINTENANCE [SYSTEM...] WorkCentre M15 MAINTENANCE [NEW DRUM] WorkCentre M15 NEW DRUM UNIT? 1: YES 2:NO Xerox WorkCentre M15/M15i User Guide...
  • Page 147: 11 Troubleshooting

    LCD Error Messages ..... 11-13 Ø Resetting the Machine....11-21 Ø Xerox WorkCentre M15/M15i User Guide Page 11-1...
  • Page 148: General

    Control Panel. Always set the guides in the paper trays to the size of the media in the tray. Ø Ensure paper clips and paper debris do not contaminate the machine. Ø Page 11-2 Xerox WorkCentre M15/M15i User Guide...
  • Page 149: Fault Clearance

    Open the ADF top cover. Ø Pull the document gently to the Ø right and out of the ADF. Close the ADF top cover. Ø Feed the documents back into Ø the ADF. Xerox WorkCentre M15/M15i User Guide Page 11-3...
  • Page 150: Exit Misfeed

    ADF or the exit area. If the document is difficult to remove, gently remove it from under the feeding roller. Close the document cover. Ø Feed the documents back into Ø the ADF. Page 11-4 Xerox WorkCentre M15/M15i User Guide...
  • Page 151: Paper Jams

    Remove the jammed paper by Ø gently pulling it straight out. If there is any resistance, and the paper does not move immediately when pulled, stop pulling and go to the next step. Xerox WorkCentre M15/M15i User Guide Page 11-5...
  • Page 152 Insert the paper cassette. Lower Ø the rear part of the cassette to align the rear edge to the corresponding slot of the machine, then insert it completely. Page 11-6 Xerox WorkCentre M15/M15i User Guide...
  • Page 153: Fuser Area

    Exit Area. CAUTION: Do not pull paper up through the fusing unit. Unfused toner may adhere in the area, resulting in smudged copies. Remove the jammed paper, in Ø the direction shown. Xerox WorkCentre M15/M15i User Guide Page 11-7...
  • Page 154 Push up on the fuser lever, then Ø close the side cover. Page 11-8 Xerox WorkCentre M15/M15i User Guide...
  • Page 155: Paper Exit Area

    If jammed in the paper exit area, ‘PAPER JAM 2’ appears in the display. Press the release latch to open Ø the side cover. Open the front cover. Ø Pull down on the fuser lever. This Ø will release pressure on the paper. Xerox WorkCentre M15/M15i User Guide Page 11-9...
  • Page 156 Push up on the fuser lever. Ø Turn the jam remove lever back Ø to the original position. Page 11-10 Xerox WorkCentre M15/M15i User Guide...
  • Page 157: Duplex Jam

    ‘BYPASS JAM’ also may occur when the paper is not properly fed into the machine through the bypass tray. If ‘BYPASS JAM’ displays and Ø paper is loaded in the Bypass Tray, pull the paper out of the machine and re-load. Xerox WorkCentre M15/M15i User Guide Page 11-11...
  • Page 158: Calling The Welcome Center

    - they may help to solve the problem quickly. If the problem persists, contact the Xerox Welcome Center or the local Xerox representative. The serial number of the machine will be required, together with any relevant error codes...
  • Page 159: Lcd Error Messages

    Duplex Jam Fuser Error LSU Error Overheat No Developer Cartridge No Paper Xerox WorkCentre M15/M15i User Guide MEANING The machine detects non feeding from the bypass tray. The loaded document has jammed in the ADF. The side cover is not securely latched. Close the side cover until it locks into The drum cartridge is near the end of life.
  • Page 160 The transmission can also be split into more than one operation if it is a large job. Try resending the fax. Ensure the remote machine is functioning correctly. Xerox WorkCentre M15/M15i User Guide...
  • Page 161: Copier Problems Solution Chart

    Copies are too light or too dark Smears, lines, marks, or spots on copies Copy image is skewed Xerox WorkCentre M15/M15i User Guide MEANING The speed dial location selected has no number assigned to it. When setting up to poll another fax machine an incorrect poll code has been used.
  • Page 162 Originals contain pictures, solids, or heavy lines. Originals are forms, newsletters, books etc. The product is being powered on and off frequently. The document cover is being left open while copies are being made. (20 lb) bond Xerox WorkCentre M15/M15i User Guide...
  • Page 163: Printing Problems Solution Chart

    Printing Problems Solution Chart PROBLEM The product does not print Half of the page is blank Xerox WorkCentre M15/M15i User Guide PROBABLE CAUSE The IEEE-1284 parallel Check the cable connection. cable or USB cable is not connected properly. The IEEE-1284 parallel...
  • Page 164 The paper may be too Try printing with a different batch of paper. damp. Do not open packages of paper until necessary so that the paper does not absorb too much moisture from the air. SUGGESTED SOLUTION Xerox WorkCentre M15/M15i User Guide...
  • Page 165: Faxing Problems Solution Chart

    Originals cannot be received even if [Start] is pressed Paper is not collated Xerox WorkCentre M15/M15i User Guide PROBABLE CAUSE The transfer roller may Print a few blank pages to clean the transfer be dirty.
  • Page 166 “Cleaning the Drum” on page 10-9. Ensure there enough toner. Check with the party sending the fax that the original was placed correctly when scanned at the remote FAX. Xerox WorkCentre M15/M15i User Guide...
  • Page 167: Resetting The Machine

    Use the following instructions to reset and reboot the machine: Press the [Clear/Clear All] key. Ø This programming sequence must Press the Ø be performed within 1.5 Press the [Clear/Clear All] key again. Ø seconds. Press the Ø Xerox WorkCentre M15/M15i User Guide navigation key. navigation key. Page 11-21...
  • Page 168 Page 11-22 Xerox WorkCentre M15/M15i User Guide...
  • Page 169: 12 Specifications

    General Specifications..... 12-6 Ø Media Specifications ..... . 12-7 Ø Xerox WorkCentre M15/M15i User Guide Page 12-1...
  • Page 170: Introduction

    Introduction The WorkCentre M15/M15i adheres to strict specifications, approvals and certifications. These specifications are designed to provide for the safety of users and to ensure that the machine operates in a fully functional state. Use the specifications listed in this chapter to quickly identify the capabilities of the machine.
  • Page 171: Printer Specifications

    Emulation Resolution Printing speed Effective printing width First print out time Xerox WorkCentre M15/M15i User Guide DESCRIPTION PCL6 True 600 x 600 dpi, 1200 dpi class 15 ppm for A4 / 16 ppm for Letter 208 mm (8.2 inches) for letter / legal (216 x 356 mm / 8.5 x 14 inch)
  • Page 172: Fax Specifications

    (12.5 ~ 28 lb) Platen: Maximum Legal (216 x 356 mm / 8.5 x 14 inch) Cassette: 550 sheets 80 g/m ADF: Up to 30 pages 80 g/m Platen: 1 page (20 lb) (20 lb) Xerox WorkCentre M15/M15i User Guide...
  • Page 173: Scanner And Copier Specifications

    Effective scanning width Maximum document width Multi copy range Reduction & Enlargement Maximum print edge margin Xerox WorkCentre M15/M15i User Guide DESCRIPTION CCD, Flat-bed Platen - Single Document Multiple Printout (SDMP): 15 cpm - Single Document Multiple Printout (SDMP): 15 cpm - Multiple Document, Single Printout (MDSP): 8 cpm at Text/Mixed 1.2 msec/line MONO and 2.5 msec/line COLOR...
  • Page 174: General Specifications

    350 W during operation 22. 85 kg / 50.37 lb (Drum and Toner Cartridges included) 560 x 429 x 456 mm (22 x 17 x 18 inches) (20 lb) (20 lb) ° F (20 ~ 80% RH) Xerox WorkCentre M15/M15i User Guide...
  • Page 175: Media Specifications

    Media Specifications ITEM Paper types available Paper sizes Xerox WorkCentre M15/M15i User Guide DESCRIPTION Plain paper, OHP film, Label, Envelope, Card, Postcard Paper Type Letter Legal JIS B5 Executive A6 card Post Card 4x6 HagaKi Envelope 7-3/4 Envelope COM-10 Envelope DL...
  • Page 176 (16lb ~ 24lb) A4, Letter, Legal, 60 ~ 160 g/m Folio, Executive, A5, (16lb ~ 43lb) B5, A6, Monarch (7 3/4), COM10, #9, C5, DL, Custom A4, Letter, Folio, 80 ~ 90 g/m Legal (20lb ~ 24lb) Xerox WorkCentre M15/M15i User Guide...
  • Page 177: Index

    Character Assignment 3-12 Cleaning Control Panel and LCD Display 10-3 Document Feeder and Collate Tray 10-3 Cleaning the Drum 10-9 Clearing Memory Xerox WorkCentre M15/M15i User Guide PHONEBK/MEMORY 9-16 SYSTEM DATA 9-16 SYSTEM ID 9-16 TX-RX JOURNAL 9-16 Clearing the Memory 9-16...
  • Page 178 Information Tab 9-25 Inserting a Pause 3-12 Installing ControlCentre 5.0 9-20 Installing Drum and Toner Cartridges 2-6 Installing Software 2-16 Introduction 1-2 Keypad Character Assignment 3-12 Keypad Dialing 6-14 Laser Safety 1-10 LCD Error Messages 11-13 Xerox WorkCentre M15/M15i User Guide...
  • Page 179 Overview of Features 3-2 Paper Cassette 5-2 Paper Specification 12-7 Paper Supply Bypass Tray 5-5 copy 4-6 Xerox WorkCentre M15/M15i User Guide Loading Paper 5-2 Paper Cassette 5-2 Preparation 5-2 Stock Types 5-8 Storing and Handling Paper 5-8 Paper, loading 2-8...
  • Page 180 Toner Save Mode 10-5 Total Number of Prints 9-25 Transmission Journal 9-18 Transmission Report (Message Confirmation) 9-18 Troubleshooting Copier Problems Solution Chart 11-15 Fault Clearance 11-3 Faxing Problems Solution Chart 11-19 General Problems 11-2 9-11 mation 10-8 Xerox WorkCentre M15/M15i User Guide 10-8...
  • Page 181 TX Poll 6-9 TX-RX JOURNAL 9-16 User Interface 3-7 Using ControlCentre 5.0 9-21 Using the automatic document feeder 6-2 Using the document glass 4-3 Xerox WorkCentre M15/M15i User Guide Welcome 1-2 Welcome Center 1-5 Canada 1-5 US 1-5 Windows 2000/XP 7-5 Windows 95/98/Me 7-5 Windows NT 4.0 7-5...

This manual is also suitable for:

Workcentre m15i

Table of Contents