HSN_7CupFoodProcManual
4/20/09
10:50 AM
Storing Your Food Processor
The Wolfgang Puck Food Processor was
figure 8
designed so that all attachments can be stored
within the unit itself.
Storage Drawer
The Processing Blade, Reversible Shredding
Disc, Reversible Grating and Shaving Disc and
Spatula are all stored in the storage drawer.
(The Spindle and Variable Slicing Disc are
stored in the Processing Bowl. See next page.)
1
figure 9
2
3
4
figure 10
5
6
figure 11
figure 12
Page 15
Remove the storage drawer from the base
of the food processor.
Place the elevated end of the Processing
Blade toward the front of the storage
drawer as indicated in figure 8, and
press down.
Place one of the Reversible Discs in
storage drawer as indicated in figure 9.
Lie spatula on top of Reversible Disc in the
storage drawer as indicated in figure 10.
Place the remaining Reversible Disc in
storage drawer as indicated in figure 11.
Your food processor drawer is now
properly assembled, as shown in figure 12.
15
Storing Your Food Processor
Processing Bowl storage
1
Fit the Processor Bowl and Spindle as detailed previously,
in figures 1, 2 and 4.
2
Place the Variable Slicing blade over the Spindle, see figure 7,
and then fit the processing cover to the processing bowl as
previously shown in figure 3.
3
Place the food pusher in the feed tube.
Cord storage
The power cord can be stored by pushing it into the back of the
motor base.
16
continued
Comments to this Manuals
Latest comments: