Table of Contents
Advertisement
Available languages
Available languages
Quick Links
GB
Description
The Laserlyte alignment system comprises a robust industrial grade laser alignment module, mounting
bracket, power supply and leads supplied complete and ready to install in a wide variety of positioning
applications
Models
Model
Description
Power mW
Wavelength nm
Projection
Table of models, power and wavelength covered by this guide
Mounting
The laser module should be mounted where it will not be exposed
to heat or dust. The universal fixing brackets (supplied) see Fig
AAA should be positioned so that full adjustment of the laser ball
mounted joint is possible.
Connection
After the laser is positioned, the jack plug ended adapter lead should be plugged into the laser and
into one of the power supply outlets. The standard lead length is 1.5m. The lead may be extended up
to a maximum length of 10m using a 3.5mm jack extension lead. An IEC mains lead appropriate to
the country of installation should be used to connect the power supply input. In the event that the IEC
connector supplied has to be cut off, the cable colours are
Brown –Live
Blue _ Neutral
Green/Yellow -Earth
The connector removed from the IEC mains cable must be disposed of immediately to avoid the risk of
electric shock.
Adjustment
The laser may be switched on and position, focus, line length and cross may all be adjusted to suit the
application.
Position. The ball joint allows the laser module to be positioned precisely.
·
Focus. Use adjustment tool AABBCC and insert into the slot A to engage one of the holes -
·
See Fig X. Rotate the lens to obtain the best focus.
Line length/Cross angle. Rotate the pin at the front of the laser to obtain the desired line
·
length or cross angle. See Fig X
Precautions
Do not connect or disconnect the jack plug adapter with the power supply switched on.
Line and cross laser modules are Visible Class 3R laser products CAUTION--The use of optical
instruments with this product will increase eye hazard.
Global Laser Technology Solutions Limited - 1 -
UG VECTORLYTE ALIGNMENT
SYSTEM
5200-00
5200-20
V5D
V3VLL
1
5
650
635
Dot
Variable
Line
5200-21
5200-22
V3LL+D
V3RXL
5
5
635
635
Line with dot
Rotating cross
.
Tel: +44 (0)1495 212213
Advertisement
Table of Contents
Summary of Contents for Vector 5200-00
- Page 1 Description The Laserlyte alignment system comprises a robust industrial grade laser alignment module, mounting bracket, power supply and leads supplied complete and ready to install in a wide variety of positioning applications Models Model 5200-00 5200-20 5200-21 5200-22 Description V3VLL...
-
Page 2: Safety Labels
Dot laser modules are Class 2, no additional precautions are required Safety Labels Class 2 Laser Module Label Class 3R Laser Module Label Mounting Brackets These brackets are included: Pic 1.1 Of laser mounting brackets Line Drawing Last Updated: 18.July.2003 Beschreibung Das Laserlyte Ausrichtsystem umfasst ein robustes Laserrichtmodul, Halterung, Stromversorgung und Anschlusskabel, das komplett und anschlussbereit ausgeliefert wird und in einer großen Bandbreite... -
Page 3: Montage
Modelle Modell 5200-00 5200-20 5200-21 5200-22 Beschreibung V3VLL V3LL+D V3RXL Leistung mW Wellenlänge nm Projektion Punkt variable Linie mit Drehkreuz Linie Punkt Tabelle der Modelle, Leistungen und Wellenlängen, für die diese Anleitung gilt. Montage Das Lasermodul ist an einem Ort zu montieren, an dem es weder Hitze noch Staub ausgesetzt ist. Die universelle Halterung (mitgeliefert) siehe Fig. - Page 4 Le système d’alignement Laserlyte comprend un module d’alignement laser industriel robuste, un support de montage, un bloc d’alimentation et des fils complets et prêts à installer dans une large gamme d’applications de positionnement Modèles Modèle 5200-00 5200-20 5200-21 5200-22 Description...
-
Page 5: Précautions D'emploi
Vous trouverez dans ce guide un tableau décrivant les différents modèles, puissance et longueur d’onde. Montage Lors du montage, le module laser ne doit pas être exposé à la chaleur ou la poussière. Les pattes de fixation universelles (fournies) – voir Fig AAA – doivent être positionnées afin que le réglage complet du joint à... - Page 6 Il sistema di allineamento Laserlyte comprende una robusta unità di allineamento laser di livello industriale, staffa di montaggio, alimentazione e connettori forniti completi e pronti ad essere installati su un’ampia gamma di applicazioni di posizionamento Modelli Modello 5200-00 5200-20 5200-21 5200-22 Descrizione...
- Page 7 Dopo aver posizionato il laser, il cavo adattatore che termina con la spina jack va inserito negli attacchi del laser e in uno di quelli dell’alimentazione. La lunghezza standard del cavo è di 1.5m. Il cavo può essere esteso fino a una lunghezza massima di 10m mediante una prolunga jack da 3.5mm. Per collegare l’entrata dell’alimentazione deve essere utilizzato un cavo di rete IEC adatto al paese di installazione.
- Page 8 Disegno linea Global Laser Technology Solutions Limited - 8 - Tel: +44 (0)1495 212213...