Select Cycle - Whirlpool CABRIO W10373816B Use And Care Manual

7.

Select cycle

Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose the
DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button
to select desired delay time.
2. Press START/PAUSE to set the
delay. The delay countdown has
started when the START/PAUSE
light stops blinking.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
10
8.
Select cycle settings, if desired
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash/Rinse Temperature, if desired. Not all
settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Dark colors that
bleed or fade
Light soils