National Cycle Paladin P4306 Installation And Owner's Manual

PARTS LIST
Index Part No. Description
1 90-970303-000 Highway Bar, Left
2 90-970304-000 Highway Bar, Right
BAG 956
3 51-513052-000 "U" Bolt
4 42-431010-000 Whizlok Nut, Chrome
5 51-516610-000 Screw, Button Head 5/16 -18 x 1"
6 51-571202-000 Bolts, Hex Flange M10-1.25 x 25
7 49-491010-000 Washer, Split
14mm Combination Wrench
1/2" Combination Wrench
5/8" Hex Wrench
PREPARATION
1. Ensure that the motorcycle is on flat level ground.
2. It is recommended that the motorcycle sit for at least one
hour prior to installation to allow the engine to cool.
3. Remove the two lower left and right engine mount bolts.
(14mm Wrench) These bolts will not be re-used. Figure 1.
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e mail: info@nationalcycle.com
By National Cycle
©2009 National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
INSTALLATION AND OWNER'S MANUAL
NOTE:
Right and Left side of Motorcycle is determined
while sitting on the bike.
Parts List
Qty.
1
1
2
6
2
2
2
Figure 1
Page 1 of 2
P4306
for YAMAHA® XV1600 and 1700
2 1
3
4
10-114859-000 01/09
6
5
7