Panasonic Omnivision PV-D4733S Operating Instructions Manual page 34

Special VCR Features (continued)
Remote Warning Feature
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV mode.
1 Press ACTION*
to display MENU.
2
MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH:3
SELECT :
SET : SET
EXIT : ACTION
3
SET UP VCR
REPEAT PLAY : OFF
REMOTE WARN I NG : ON
AUTO SHUT-OFF : OFF
AUTO VCR/TV : OFF
SELECT : SET: SET
EXIT : ACT I ON
• If "OFF," remote warning will not appear
when invalid key is pressed.
4
Press ACTION twice
to return to normal screen.
Tape Position and Tape Status Feature
To find out the present tape position and amount of tape remaining.
Tape position is displayed for VHS-C type Cassettes, tapes
under 30 minute long, and some other tapes, but the
position is not correct.
1 Press TAPE POS.
to detect current tape position.
DETECTING TAPE POSITION
SP
R 120 M I N.
BEG I N END
2 Press TAPE POS.
to return to normal screen.
Note
This function cannot display exact amount of tape remaining for
tapes 30 minutes or less, or for tapes over 120 minutes in length.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
34
Press
to select "SET UP VCR,"
and
press SET.
Press
to select
"REMOTE WARNING," and
press SET
to set "ON" or "OFF."
• "DETECTING TAPE POSITION" is displayed
only when a cassette is first inserted, and it
takes several seconds for correct tape
position to appear.
• The present tape position indication and
amount of tape remaining (according to
tape speed) is displayed.
• Tape remaining time display may not be
precise.
*Important: If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
INPUT
ACTION
SELECT
SET
STOP
PAUSE/
STILL
Tape Position
REC