Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Wells Manuals
  4. Griddle
  5. Countertop Electric Griddles
  6. Operation manual

Wells Countertop Electric Griddles Operation Manual

Countertop electric griddles
Hide thumbs

Advertisement

Quick Links

Download this manual
101
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-0569
www.wellsbloomfield.com
OPERATION
MANUAL
for
COUNTERTOP
ELECTRIC
GRIDDLES
includes:
INSTALLATION,
USE and CARE
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the GRIDDLE and is to be given to the OWNER
or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS
of the GRIDDLE. Additional manuals are available from your WELLS DEALER .
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS GRIDDLE. Contact your WELLS DEALER if you have any questions
concerning installation, operation or maintenance of this equipment.
P/N 303339 Rev.(-)
M101 110100 cps

Advertisement

loading

Related Manuals for Wells Countertop Electric Griddles

Summary of Contents for Wells Countertop Electric Griddles

  • Page 1 This manual is considered to be part of the GRIDDLE and is to be given to the OWNER or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of the GRIDDLE. Additional manuals are available from your WELLS DEALER . THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS GRIDDLE.
  • Page 2 Seller’ s obligation under this warranty is limited to the repair of defects without charge by a Wells Mfg. Co. factory authorized service agency or one of its sub-service agencies. This service will be provided on customer’ s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest authorized service agency, transportation charges prepaid, for service.

  • Page 3: Table Of Contents

    Be sure to retain the container for inspection. Wells Manufacturing cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

  • Page 4: Features And Operating Controls

    FEATURES and OPERATING CONTROLS THERMOSTAT On THERMOSTATICALLY CONTROLLED griddles, power is applied to the griddle heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. The temperature of each section of the griddle is individually controllable to allow preparation of different products, or to allow the griddle to be used for both product preparation and temporary holding of prepared product.

  • Page 5: Safety Procedures

    Knowledge of proper procedures is essential to the safe operation of electrically energized equipment. In accordance with generally accepted product safety labeling guidelines for potential hazards, the following signal words and symbols are used throughout this manual. DANGER - cause severe personal injury, death, or substantial property damage in the event the statement is ignored.

  • Page 6: Installation Instructions

    INSTALLATION INSTRUCTIONS UNPACKING AND INSPECTION 1. Carefully remove the GRIDDLE from the carton. Remove all protective plastic film, packaging materials and accessories from the GRIDDLE before connecting electrical power or otherwise performing any installation procedures. NOTE: DO NOT discard the CARTON and other PACKAGING MATERIAL until you have inspected the warmer for hidden damage and tested it for PROPER OPERATION.

  • Page 7: Operating Instructions

    PREPARING THE GRIDDLE SURFACE 1. SEASONING STANDARD GRIDDLES As manufactured, the steel surface of your Wells griddle has microscopic pores. It is important to fill these pores with oil in order to provide a hard, non-stick cooking surface. Preheat the griddle surface to 375ºF (191ºC).
  • Page 8 RECOMMENDED GRILLING TIMES AND TEMPERATURES NOTE: The times and temperatures in this chart are suggestions only. Your own experience with your own menu items will be your best guide to achieving the best food product. PRODUCT Sausage, link and patty Bacon Canadian Bacon Ham Steaks...

  • Page 9: Preventative Maintenance

    PREVENTATIVE MAINTENANCE CARD STANDARD ELECTRIC GRIDDLE PREPARATIONS: Set temperature control to 220ºF. Allow the griddle temperature to drop to 220ºF before proceeding. FREQUENCY: Daily TOOLS: Griddle Brick or Pumice Stone Fiber Brush Plastic Scouring Pad, Plastic Scraper Mild Detergent, Non-Abrasive Cleanser Clean Soft Cloth / Sponge Food Grade Silicone Sealant 1.

  • Page 10: Chrome Plated Griddle Cleaning Instructions

    PREVENTATIVE MAINTENANCE CARD CHROME PLATED ELECTRIC GRIDDLE PREPARATIONS: Set temperature control to 225ºF. Allow the griddle temperature to drop to 225ºF before proceeding. FREQUENCY: Daily TOOLS: 4” Razor-Style Scraper Mild Detergent, Non-Abrasive Cleanser Clean Soft Cloth / Sponge Food Grade Silicone Sealant 1.

  • Page 11: Parts & Service

    Verdi, NV 89439 phone: (775) 345-0444 ask for: Customer Service Service Parts Department Service Parts Department can supply you with the name / telephone number of the WELLS AUTHORIZED SERVICE AGENCY nearest you. ACCESSORIES LEGS, 4” , METAL SET OF 4...
  • Page 12 WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 Customer Service (775) 345-0444 Ext. 502 fax: (775) 345-0569 www.wellsbloomfield.com...