Weider club 4870 WESY3906.0 User Manual page 20

Weider user's manual weight system wesy3906.0
Table of Contents

Advertisement

42. Wrap the Low Cable (70) under a Pulley (43).
Attach the Pulley to the Military Press Frame (20)
with an M10 x 40mm Bolt (104) and an M10
Nylon Locknut (84).
43. Route the Low Cable (70) up through the Left Top
Frame (4) and over a Pulley (43). Attach the
Pulley inside the Left Top Frame with an M10 x
65mm Bolt (87), two M10 Washers (108), two 1/2"
Bushings (68), and an M10 Nylon Locknut (84).
44. Wrap the Low Cable (70) over a Pulley (43) and
down through the Left Top Frame (4). Attach the
Pulley inside the Left Top Frame with an M10 x
65mm Bolt (87), two M10 Washers (108), two 1/2"
Bushings (68), and an M10 Nylon Locknut (84).
45. Identify the Press Cable (72). Attach the Cable
to the Left Base (2) with an M8 x 25mm Shoulder
Bolt (92). Make sure that the Cable end can
pivot easily around the shoulder of the Bolt.
46. Wrap the Press Cable (72) over a Pulley (43).
Attach the Pulley, a Cable Trap (48), an M10
Washer (108), and two Guards (45) to the Leg
Press (12) with an M10 x 120mm Bolt (97) and
an M10 Nylon Locknut (84). Make sure that the
Cable Trap is oriented to hold the Cable in the
groove of the Pulley.
42
43
68
108
87
44
45
2
46
84
20
70
84
43
104
20
43
70
84
108
68
4
43
84
4
68
108
68
108
87
70
92
72
72
45
48
43
108
45
12
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Club 4870Wesy3906.0

Table of Contents