Table of Contents Important Safety Instructions For Installation And Use Bracket Installation ™ Wiring Installation “Prodrive /Quantum Wiring Installation “DoorMaster ® Wiring Installation “idrive ” Wiring Installation “Torsion idrive Photoelectric Safety Sensor Alignment Photoelectric Obstruction Sensing Test Important Safety Instructions Warranty Customer Service Number THIS IS THE SAFETY ALERT SYMBOL.
Step 1: Photoelectric Safety Sensor Bracket Installation WARNING DISCONNECT ALL POWER TO GARAGE DOOR OPENER BEFORE SERVICING OR INSTALLING ACCESSORIES OR PHOTOELECTRIC SAFETY SENSORS. FOR ALL OPENERS, UNPLUG 120 V AC POWER CORD FROM RECEPTACLE. FOR DOORMASTER, ALSO UNPLUG TELEPHONE CORD TYPE COMMUNICATIONS CABLE. Select a mounting position, no more than 5 inches above the ﬂ...
Step 2: Photoelectric Safety Sensor Wiring Installation For: ™/ ® Prodrive Quantum /Classicdrive 3222C, 3224C, 3320C, 3320B, 3322B, 3324B, 3012, 3014, 3016, 3018, 3211, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414, 3512, 3514. Uncoil wires from the photoelectric sensors and route wires up the garage walls and along ceiling towards the right side of the opener (see Fig.
Step 3. ® Torsion idrive models: 3651-372, 3750-372. Uncoil wires from safety sensors and route wires up garage wall and above torsion tube towards the right side of the opener. Route wires behind torsion tube and tack wires in place with insulated staples (not supplied).
Step 3: Photoelectric Safety Sensor Alignment IMPORTANT! THIS INFRARED SAFETY SENSOR SENDS AN INVISIBLE BEAM OF LIGHT FROM THE SENDING UNIT TO THE RECEIVING UNIT ACROSS THE DOOR OPENING. THE DOOR OPENER WILL NOT OPERATE UNTIL THE SAFETY SENSOR IS CON- NECTED TO THE POWER UNIT AND PROPERLY ALIGNED.
Wayne-Dalton Corp. (The Manufacturer) warrants the PHOTOELECTRIC SAFETY SENSORS will be free from defects in materials and workmanship for a period of ONE YEAR from the date of installation, provided they are properly installed, maintained and cared for under speciﬁ ed use and service.
FCC and IC Statement FCC Regulatory Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Regulatory Information: This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regula-tions.