Advertisement
Quick Links
e.
Navigate to Start>Printers and Faxes. On
the Printers and Faxes screen, right click on
the Wasp LabelWriter 330 Turbo-USB, then
select Properties:
The Properties screen appears.
f.
On the Properties screen, click Print Test
Page:
g.
While the test page is printing, a screen
similar to the following appears. Click OK
on the screen if the test page prints
correctly.
If it does not print correctly, click
Troubleshoot to access the Printer Help
and Support Page.
Note: The test page will consist of a
Windows Logo. The logo will appear
partially cut off on the label. This is
normal and should be a successfully
printed test page.
# 000000
Wasp
LabelWriter 330
Turbo Printer
Quick Start
Guide
© 2006 Wasp Technologies
Advertisement
Related Manuals for Wasp LabelWriter 330
Summary of Contents for Wasp LabelWriter 330
- Page 1 Navigate to Start>Printers and Faxes. On the Printers and Faxes screen, right click on the Wasp LabelWriter 330 Turbo-USB, then select Properties: The Properties screen appears. On the Properties screen, click Print Test Page: While the test page is printing, a screen similar to the following appears.
- Page 2 Setting up the 330 Turbo Printer Unpack Remove the printer from the box and place it on a stable, flat surface. The box will contain: • Printer • Power cord and adapter • USB Cable • 1 roll of labels •...