Picture-In-Picture (Pip) Mode; Adjusting Basic Pip Settings - Vizio SV420XVT1A User Manual

4.17.2 Picture-In-Picture (PIP) Mode

Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
DTV
MAIN
DTV
TV
AV1
AV2
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
RGB
" " – Indicates which inputs are available for PIP and POP modes.

4.17.3 Adjusting Basic PIP Settings

The PIP channel is independent of the main TV channel. To change the PIP channel, press the PIP CH
button on the remote control. Alternatively, you can change the PIP channel by pressing the CH+ or CH-
PIP sub-picture. To swap the main picture program with the PIP sub-picture program, press SWAP on
the remote control. If you press SWAP again, it will return the program to the main picture.
Version 6/2/2008
Component
TV AV1 AV2
button.
Repeated pressing of the PIP
button will turn on, turn off the
PIP mode.
Press the PIP SIZE button to
alternate between Small, Medium
and Large PIP sizes.
Repeated pressing of the PIP
INPUT button will cycle through
the inputs for PIP. This button has no effect when PIP is off.
You can swap the program that is in the main picture with the program in the
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Component
HDMI1
1 2
74
HDMI2 HDMI3 HDMI4 RGB