Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio HDTV VX20L User Manual

VIZIO VX20L HDTV User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power 'VIZIO' light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.

1.2 Side Panel Controls

Power ( ) – Switch the VX20L on by pressing the button once. Press the button again to the VX20L
off.
Menu – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
Channel ▲/▼ – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as up and
down controls in the OSD menus.
Volume ◄/► – Use these buttons to increase or decrease to the
speaker volume. While the OSD is active, these buttons function as
left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons
steps through the input sources in the following
sequence: TV, AV-C (Composite Video, yellow
RCA plug), AV-S (S-Video), Component, RGB,
and HDMI. Once you have stepped through the
entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 5/30/2007 8
www.VIZIOCE.com