National Cycle VStream N20307 Sport Installation And Owner's Manual

Attention
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
TOOLS REQUIRED:
3mm Hex Key
Phillips Screwdriver
PARTS LIST
Index Description
1 Windshield, Hard Coated Lexan® polycarbonate
Bag#1103
2 Screws, M5 Nylon Black
INSTALLATION
Stock nylon screws or Nylon Screws (2) from
Bag#1103 may be used during installation.
1. Remove the 2 screws holding plastic front plate to top
surface of windscreen. Figure 1 (3mm Hex Key)
2. Remove front plate.
3. Remove the 6 screws holding the stock windscreen to
the motorcycle. (Phillips Screwdriver)
4. Place VStream Windscreen into position on motorcycle.
Secure at all 6 locations with the stock screws or replace-
ment Screws (2). Tighten the screws firmly. Do not over
tighten. Figure 2 (Phillips Screwdriver)
5. Re-install front plate on outside of windscreen using
stock screws. (3mm Hex Key)
Note:
Right and left side of motorcycle is determined while
sitting on the bike.
Qty.
1
6
Bag#1103
Figure 1
Figure 2
VStream Windscreen
®
Installation and Owner's Manual
N20307 Sport, N20308 Mid and N20309 Tall
for FJR 1300 12~
Tips for facilitation of operation,control and
adjustment, as well as maintenance work.