•
Change the
•
Wait for t
he screen to update with the Wi-Fi settings for the selected profile.
•
Change the settings as desire
these settings cannot be changed directly. For this Profile, you can only click
"Generate" to generate new values for the network name (SSID) and security
key.
•
Click the "Update" button to save your changes. Alternatively, cl
button to both update this profile and start u
Wi-Fi
Se tings
t
Each Wi-Fi
Profile contains the following settings. For the "Temporary Hotspot" profile,
these settings cannot be changed directly.
Network Name (SSID
-
Selected Profile. Note that each profile m
to avoid confusing wireless clients.
802.11 Mode - Select the desired mode.
-
Channel – Select the desired channel. If available, the "Auto" setting is
-
recommended. Wi
automatica
experiment to see which channel provides the
default value will be fine.
Security - For the "Secure" profile, select the desired security method. Use
-
the most secure method supported by your wireless clients. The opt
listed in order, from least secure to most secure.
•
WEP 64-bit
•
WEP 128-bit
•
WPA Personal/PSK (TKIP)
•
WPA2 Perso
Network Key - Enter the networ
-
key depend upon the Security op
•
WEP 64-bit - 5 ASC
•
WEP 128-bit - 13 ASCII characters or 26 HEX characters.
•
WPA Personal/PSK (TKIP) - ASCII string, 8 to 63 characters in length.
•
WPA2 Personal/PS
Selected Profile to the Profile you wish to change.
d. Note that for the "Temporary Hotspot" profile,
) - The Network Name (also called SSID) of the
th this setting, the best available channel will be
lly selected. If the "Auto" setting is not available, you can
nal/PSK (AES)
II characters or 10 HEX characters.
K (AES) - ASCII string, 8 to 63 characters in length.
26
sing it (make it the current profile).
ust have a different network name
best results, but normally the
k key. The requirements for the network
tion chosen.
ick the "Apply"
ions are