Veo Observer User Manual page 52

5. Click Firewall. For Enabled or Disabled
Firewall features click Enabled.
Click Apply.
6. Click on DMZ. Enter the camera IP
address for the Client PC IP address.
Click Apply.
The Veo Observer should now be configured to
work with your network and be accessible to the
Internet.
D-Link DI-604 Ethernet Broadband Router
The D-Link DI-604 Ethernet Broadband Router setup program is Web-based, which means that it is accessed
through your web browser. To use the Setup Wizard:
1. Ensure that you have at least one computer connected to the router.
2. Launch your web browser on the computer. Enter the following URL in the location or address field of your
browser: http://192.168.0.1.
3. After the connection is established, the logon screen will pop up. To log in as an administrator, enter the
username of "admin" and the password (there are no default password, leave it blank). Click the Next button.
4. On the Home page click on DHCP. Click Enable. Click Apply.
Page 52 of 65