Connecting The Power Cord; Connecting A Pc - Venturer PLV76176 Instruction Manual

CONNECTIONS
CONNECT ThE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the / I button on the unit or remote control to turn on the unit.
NOTE
• Be sure the AC power cord is disconnected and all functions are off before making connections.
• Make sure that all the components are connected correctly.
• To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully
insert.
• When you are not going to use the unit for a long period of time, disconnect the power cord.
To AC outlet
CONNECT A PC
Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/ VGA input on
this unit using a monitor cable and audio cable (not included) as shown.
Make sure you connect the cable from the computer (PC Connector and PC AUDIO) to this unit (PC IN
MONITOR / VGA and AUDIO IN).
E - 9