Advertisement
Quick Links
Owner's Manual
3/8 in. Single Speed / Reversible
CORDLESS DRILL
Model No.
315.101020
Save this manual for
future reference
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
• Safety
• Features
• Operation
• Maintenance
• Parts List
Customer
Help
Line:
1-800-932-3188
Sears,
Roebuck
and
Co.,
Hoffman
Estates,
IL 60179
USA
972000-646
2-99
NRTL
Advertisement
Related Manuals for COMPANION COMPANION 315.10102
Summary of Contents for COMPANION COMPANION 315.10102
- Page 1 Owner's Manual 3/8 in. Single Speed / Reversible CORDLESS DRILL Model No. 315.101020 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck Co., 972000-646...
-
Page 2: Full One Year Warranty
• Warranty ... • Introduction and Product Specifications ... • Rules For Safe Operation ... A. Important Safety Rules For Battery Toots ... B. Important Safety Instructions For Charger ... C. Important Information For Recharging Hot Batteries ... • Accessories ... •... - Page 3 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
-
Page 4: Important Safety Rules For Battery Tools
RULES FOR SAFE OPERATION NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean your tool. - Page 5 RULESFOR SAFEOPERATION(Continued) An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: That pins on plug of extension cord are the same number, size and shape as those of plug on charger.
- Page 6 The following recommended accessories are currently available at Sears Retail Stores. • 3/8 in. Chuck (Item No. 9-2975) WARNING: The use of attachments or accessories not listed might be hazardous. KNOW YOUR DRILL See Figure 1. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements.
- Page 7 WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not allow familiarity with your drill to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
-
Page 8: To Remove Battery Pack
REVERSIBLE See Figure 3. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill he(d in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. - Page 9 INSTALLING BITS See Figure 6. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 3. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
- Page 10 WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 8. When drilling hard smooth surfaces use a center punch to mark desired hole location.
- Page 11 CHUCKREMOVAL See Figures 10, 11, and 12. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely.
- Page 13 WARNING: When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
- Page 15 COMPANION 3/8 INCHCORDLESSDRILL number in all correspondence regarding your 3/8 in. CORDLESS DRILL or when ordering repair The model number will be found on a plate attached to the motor housing. Always mention the model pads. SEE BACK PAGE FOR PARTS Number 616478-003 973101-001...
- Page 16 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME s" (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout le service ou les pieces For the repair or replacement parts you need: Call 6 am - 11 pm CST, 7 days a week...