Summary of Contents for UTStarcom IAN-02EX
-
Page 1: Installation Guide
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.1 UTStarcom iAN-02EX TELEPHONE’S ANALOGUE ADAPTER INSTALLATION GUIDE Release V1.8.2.17a... -
Page 2: Table Of Contents
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.2 SUMMARY SKYPHO VOIP SERVICE...3 iAN-02EX UTStarcom PACKAGE CONTENT ...3 EQUIPMENT PHYSICAL CONNECTION...4 ACCESS TO THE ADAPTER ...5 Access to ATA when the DHCP service is working ...5 Access to ATA when the DHCP is not working...6 ATA CONFIGURATION...7... -
Page 3: Skypho Voip Service
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual SKYPHO VOIP SERVICE The use of the SKYPHO’s voice service on IP (VoIP) is simple and quick. You need only an Internet access, a traditional telephone (analogue) and a PC, and with few “clicks” you could use the new telephone line with quality equal to the traditional landline. -
Page 4: Equipment Physical Connection
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual EQUIPMENT PHYSICAL CONNECTION First of all, you have to make the physical connection of the equipment, following the simple instructions hereafter included: Internet Internet At the end of the connections, the “PWR”, “WAN”, “ENET”, and “VoIP” LEDs will light:... -
Page 5: Access To The Adapter
IP address has been assigned to your iAN-02EX ATA and write it down. start your Web Browser (i.e. Internet Explorer), insert the IP address of your iAN-02EX ATA and press “GO”. It will appear the window prompt for “Network Password”... -
Page 6: Access To Ata When The Dhcp Is Not Working
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual Access to ATA when the DHCP is not working configure the static IP address on the LAN port of your PC. Click on “Start \ Settings\ Network connections“, double click on “Local area connections (LAN)” . -
Page 7: Ata Configuration
ATA CONFIGURATION Before proceeding with the configuration of your iAN-02EX ATA via WEB Browser, it is important that you have at your disposal the Eutelia’s username and password for the VoIP service that you obtained during registration or those you have modified on the Eutelia’s site. -
Page 8: Lan Parameters
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual pag.8 LAN parameters Click on “LAN configuration” menu, then verify that the “Status” item of the DHCP Configuration is set on Disable. Note: If in your LAN are used static IP addresses, it is necessary to modify the “LAN IP Configuration”... -
Page 9: Voip Parameters
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual VoIP parameters NOTE: The SIP account is the subscription registered on Eutelia’s server that allows to access to the VoIP services provided by the server itself. It is composed by... - Page 10 Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual click on “SIP” menu, then on “Send#” item choose the option Disable and click click on “STUN” menu, then verify the values and click OK The “NAT Address” item will be automatically updated with the public IP address after the authentication of the ADSL access.
-
Page 11: Save Configuration
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual Save configuration click on “Save Configuration” menu, then select “Configuration File” and click on “Save” after few seconds, will appear the “Reboot” page: click on “Reboot” and wait the restart of ATA. -
Page 12: Configuration Parameters Of Utstarcom Ian-02Ex Ata Equipment
Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual CONFIGURATION PARAMETERS OF UTStarcom IAN-02EX ATA EQUIPMENT Access parameters to the equipment: IP address: verify on ADSL modem User name: supervisor Password: Assigned by Eutelia WAN Configuration DHCP on, for obtaining an IP address...