Selecting From The Setup Menus; Setting The Color Screen - Universal Remote Control Complete Control MX-810 Operating Manual

Selecting from the Setup Menus

There are two pages of settings on the Setup Menu. Use the page buttons to
view them. To select, simply press the corresponding button.

Setting the Color Screen

Although usage of the color screen will affect how frequently you have to
charge the battery, the screen does not drain the battery as quickly as the
button lighting does.
Setting Brightness
Use the buttons next to DIM and BRIGHT to adjust the brightness. You'll
see the screen dim and brighten. When you have the right setting, press
SAVE. Pressing Cancel discards all changes.
MX-810 O M
WNERS
Select the setting you'd like to adjust by pressing the
button beside the screen.
Use the Page button to see other pages.
Exit the Setup Menus by pressing the Activities or
Devices button, or simply waiting (the setup menus
time out in 30 seconds).
Adjust the brightness of the screen to taste. In most
lighting conditions, 50% gives good results.
The Pick Up sensor senses motion, so it will keep
the screen on (and drain your battery charge) as
long as you are holding it in your hand. If you turn
off the Pick Up sensor you will extend battery life
(the screen will still light up when you press any
button).
Adjust how long the screen stays lit after you put it
down or stop using it here.
Use the DIM and BRIGHT buttons to adjust the
lighting of the color screen.
Press the SAVE button to save your setting.
Page 8
ANUAL