Troubleshooting - Uniden UBC73XLT Owner's Manual

Troubleshooting

If your UBC73XLT is not performing properly, try the
following steps.
Problem
The
scanner
doesn't
work.
Improper
reception.
Scan
won't
stop.
Troubleshooting
Possible Cause
The scanner
might not be
receiving any
power.
The scanner's
antenna might
need to be
adjusted.
The squelch
might need to
be adjusted.
Suggestion
Check the batteries
or make sure the
AC adapter is
connected to an AC
outlet and the
scanner.
If there is a wall
switch that controls
power to the AC
outlet where you
connected the AC
adapter, make sure
it is on.
Check the antenna
connection or move
or reposition the
antenna.
Move the scanner.
You might be in a
remote area that
could require an
optional multi-band
antenna. Check
with your dealer or
local electronics
store.
Adjust the squelch
threshold. See
"Turning On The
Scanner and
Setting Squelch" on
Page 30.
Troubleshooting
47