Table of Contents
Advertisement
Setting the Time
The clock on the answering system starts when power is supplied to the base. Follow these
steps to set the clock to the correct time.
1) Press menu.
The system announces the current time. The message counter displays the day of the week
• Normally the idle time
for the menu mode is 30
(from " " Sunday to " " Saturday).
seconds before the
2) Press
system returns to
3) Press set/ringer to select the day.
standby. However, for
4) Press
setting the time, the
idle time is extended to
The numbers " " through "
two minutes.
5) Press set/ringer to select the hour.
• Press and hold
or
6) Press
to quickly scroll
The numbers "
through the numbers on
7) Press set/ringer to select the minute.
the display.
8) Press
The message counter displays " " or " ".
9) Press set/ringer to select the AM/PM setting.
A confirmation tone sounds, the system announces "Time" and, the day and time are
announced for your review.
Setting a Personal Security Code
To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code (
1) Press menu twice. The current PIN code is announced as it appears on the base.
2) Press
3) Press set/ringer to select the PIN code.
A confirmation tone sounds, the system announces "Security code" and the new PIN code.
[ 44 ]
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
or
until the correct day is announced and the corresponding number appears.
or
until you hear the correct hour setting.
" appear on the base as each hour is announced.
or
until you hear the correct minute setting.
" through "
" appear on the base as each minute is announced.
or
until you hear the correct AM or PM setting.
-
). To select a PIN, perform the following steps:
or
until the desired number appears.
Advertisement
Table of Contents
