Before Using, Register Second Handset To The Base Unit - Uniden Answering Machine User Manual

Before Using, Register Second Handset to
the Base Unit
When the dual handsets are removed from the packaging, the handset that is placed in
the base unit first (to charge battery for 15-20 hours), will automatically be registered
to the base unit. (It does not matter which handset you choose to place in the base
unit first.)
You will also need to register the second handset by placing it in the base cradle.
The second handset WILL NOT operate properly until the registration has been
completed. Once the handset is registered, it is ready for use.
Follow these simple steps to register:
1) First, install the battery packs in both handsets. Place either handset in the base,
then place the second handset in the charging cradle. Charge both handsets for 15-
20 hours.
2) After fully charging both handsets, remove the handset in the charging cradle, and
place it in the base. The charge/in use LED light on the base will begin to flash,
indicating that the registration is taking place between the second handset and the
base.
3) Wait for at least 5 seconds before removing the handset from the base.
Congratulations, the registration has been completed, and your dual handset cordless
phone is ready for use!
www.uniden.com
• When you charge the
handset, Caller ID
summary screen and
the name of the
handset,
If appears, you
are charging the
handset No. 2.
• The charging cradle
can be used to charge
either handset.
G E T T I N G S T A R T E D
appears.
[ 13 ]