Quick Installation; Optional Installation - Tripp Lite OmniPro500 Owner's Manual

Quick Installation

Plug your UPS into an
1
electrical outlet.
Plug essential equip-
2
ment such as your
computer, monitor and
modem into battery-
supported outlets.
Plug other equipment
into surge-only outlets.*
*Separate battery-supported/surge and surge-
only outlets are identified on the back of your
UPS. Your UPS is designed to support only
computer equipment. You will overload your UPS
if you connect household appliances, laser
printers or surge suppressors to the battery-
supported outlets.

Optional Installation**

Using telephone cords, connect your
wall jack to the UPS jack marked "LINE"
(or "IN"). Connect your equipment
to the UPS jack marked "EQUIP"
(or "OUT").
**Phone line connections are optional. Your UPS
will function properly without these connections.
Make sure the equipment you connect to the
UPS's telephone jacks is also protected against
damaging surges on the AC line.
Set your UPS's
3
"OFF – ON" Switch.***
• Set to "ON" when you are using
connected equipment.
• Set to "OFF" when you are not using
connected equipment.
(WARNING! When set to "OFF," UPS will
not provide battery backup during a
blackout or brownout.)
*** See Basic Operation section for the Switch
Function, UPS Conditions and Setting
Advantages.
3