Extron electronics TSP Series Installation Manual

TSP Series • Installation Guide
The Extron TSP 1, TSP 2, and TSP 3 are tempered glass TLP Screen Protectors that
can minimize damage to the touchscreens of Extron TouchLink Touchpanel models:
TSP 1 — TLP Pro 525C, TLP Pro 525M, TLP Pro 525T, TLS 525M, and
•
TLC Pro 526M
TSP 2 — TLP Pro 725C, TLP Pro 725M, TLP Pro 725T, TLS 725M, and
•
TLC Pro 726M
TSP 3 — TLP Pro 1025M, TLP Pro 1025T, TLS 1025M, and TLC Pro 1026M
•
To attach the screen protector:
NOTE: If the touchpanel has already been mounted, Extron recommends
removing the touchpanel and placing it on a flat, stable surface before
installing the screen protector.
Clean the touchpanel screen thoroughly, using an alcohol wipe.
1.
Wipe the screen with a microfiber cloth to ensure it is dry and, if required, use
2.
dust remover to ensure no dust or other particles remain.
Place the touchpanel on a flat surface and ensure that it cannot move while the
3.
screen protector is being attached.
Peel the backing film away from the screen protector.
4.
NOTE: Do not touch the adhesive surface of the screen protector.