Blodgett MT2136E/G Specifications

MODEL MT2136E/G
Gas/Electric Conveyor Oven
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Legs/casters:
17-1/4" (438mm) black legs with casters
23-1/4" (591mm) black legs with casters
Triple stack base with casters
Shelf extension:
6" (152mm)
12" (304mm)
Conveyor belt configurations:
Twin belt-two 10" (254mm) wide belts
Split belt - one 8" (203mm) and one
12" (305mm) belt
Flexible gas hose with quick disconnect and
restraining device:
36" (914mm)
48" (1219mm)
Note: Two 48" (1219mm) and one 36" (914mm) hose
on triple model
10' (3.0M) cord with receptacle (gas model only)
Side loading glass door and handle
Stacking rails
Stainless steel interior (available with remote control
ovens only)
One year additional extended warranty
OPTIONS AND ACCESSORIES
(AT NO ADDITIONAL CHARGE)
Remote computerized controls
44 Lakeside Avenue, Burlington, VT 05402 • Phone: (802) 658-6600 • Fax: (802) 864-0183
Project
Item No.
Quantity
Blodgett conveyor oven with 21" (533mm) wide belt and 36" (914mm) bak-
ing zone length. Single, double or triple stack models are available.
All data is shown per oven section, unless otherwise indicated.
EXTERIOR CONSTRUCTION
Stainless steel front, top and sides
Aluminized steel back and bottom
1-1/2" (38.1mm) Vitreous fiber insulation at bottom, back and top
Ceramic fiber insulation at blower installation
INTERIOR CONSTRUCTION
Aluminized steel nozzles and bottom surface
Adjustable aluminized steel air flow plates at top
21" (533mm) stainless steel wire mesh conveyor belt
Two single inlet blowers above the combustion area or heater for air circulation
OPERATION
Heat transferred through forced convection (impingement)
Open vented baking compartment
Electronic spark ignition control system (gas model)
Gas power type burner has mixer with adjustable shutter and sight window
(gas model)
Internal gas pressure regulator (gas model)
Tubular resistance heat (electric model)
Integral or remote microprocessor based controls with solid state 600°F
(315.5°C) maximum thermostat and belt speed control with digital display
Two blower motors (1/8 HP minimum) with thermal overload protectors
Three blower area cooling fans
STANDARD FEATURES
Computerized front mounted controls
Belt direction: (must specify)
left to right
Product stops
Oven start-up
One year parts & labor warranty*
* For all international markets, contact your local distributor.
BLODGETT OVEN COMPANY
www.blodgett.com
right to left