Download Print this page

Superior County Accents Arbor Seat Assembly

Advertisement

Quick Links

Assembly Instructions For These Arbors:
• Madison
• Heritage
• Kingston
Please read and follow these instructions. Refer to list of contents on back page.
• Jefferson
• Victorian
• Kinzer
• Arbor Seat Assembly

Advertisement

loading

Summary of Contents for Superior County Accents Arbor Seat

  • Page 1 Assembly Instructions For These Arbors: • Madison • Jefferson • Heritage • Victorian • Kingston • Kinzer • Arbor Seat Assembly Please read and follow these instructions. Refer to list of contents on back page.
  • Page 2 For 50" use 57¾" For 66" use 73¾" For Victorian 62" use 69¾" end to end 6" Post anchors should be positioned exactly according to On a flat surface, position posts with sockets for the bottom railing opposing each other, as shown, and top the measurements shown above.
  • Page 3 Finished, a side wall is ready to be put into the arbor. Notice how the post is routed to accommodate the railing and roof sub assemblies, especially the corner braces. See Figs #12 & #13 for more information in determining post orientation Having the posts orientated correctly...
  • Page 4 With the arbor configured in the wide position, the After corner braces are screwed into place drive a screw through the post into the roof beam. corner braces are installed on the inside. Apply a moderate amount of PVC adhesive on the inside of the roof beam end caps.
  • Page 5 Center bench planks on bench brackets leaving Drive screws into plank bottoms through bench brackets from the bottom. approximately 1" from the back of the plank to the post and approximately 1" between planks. Glue end caps onto bench planks. The completed arbor is ready for you to enjoy.
  • Page 6 Slide lattice top and bottom caps over exposed ends. Jefferson Side Wall Assembly The Jefferson side walls are built by inserting dowels Assemble the side wall as shown here and screw the into the bottom rail first, then the middle and, finally, the crosspieces to the posts.
  • Page 7 Victorian Arbor Roof Installation The Victorian style roof is different than the other arbors. Begin by inserting the two middle cross pieces into the beams. Fix them in place by driving screws though the beams into the cross pieces. Center the 3 roof top pieces on the cross pieces and fix in place, driving...
  • Page 8: Contents Of Shipment

    Contents of Shipment Kingston Arbor: Jefferson Arbor: Box #1 Box #1 Quantity Description Quantity Description 4” x 87” Routed Arbor Posts (2-Left & 2-Right) 4” x 87” Routed Arbor Posts (2-Left & 2-Right) 4” x 32” Aluminum Arbor Anchors 4” x 32” Aluminum Arbor Anchors 7/8”...

This manual is also suitable for:

County accents madison arborCounty accents heritage arborCounty accents kingston arborCounty accents jefferson arborCounty accents victorian arborCounty accents kinzer arbor