Precautions Before attempting to connect, or operate this product, please read the manual completely. NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Caution Install the control unit away from moisture, heat sources, and places exposed to strong magnetic or electric fields. When condensation forms inside the player or on the surface of the disc due to sudden temperature changes from cold to hot, the player may not operate correctly.
This unit employs a laser system. To ensure proper use of the unit, read this manual carefully and keep it for future reference. If the unit requires servicing, contact the retailer and/or Blaupunkt Service Center - see “Limited Warranty Information”. To prevent direct exposure to the laser radiation, do not open the cabinet or back of the unit.
Accessories Remote Control Mounting Brackets Mounting Strap Power Connectors Removal Keys Trim Ring Wiring Harness Antenna Cable Data Cable Batteries Hardware Case for Detachable Panel...
Page 9
[SRC] button • Press to cycle through all available sources. [NAVI] button • Press to select Navigation mode (if optional navigation unit is installed). [DIS/FLIP] multi-function button • Press DIS to change clock info, press and hold DIS to change display background color.
Remote Control Button Functions Basic Operation [POWER] button • Power on and off [MUTE] button • Mute on and off [SOUND/DSP] button • Display audio control window [DOWNMIX] button • Audio downmix on and off [NAVI] button • Switches to navigation mode [SRC] button •...
Page 11
Remote Control Button Functions [REPEAT] button • Repeat chapter or title [ZOOM] button • Zoom in or zoom out CD-A/CD-C/MP3 mode [ ll ] button • Switches between play and pause [0 ~ 9] buttons • Press to enter track or file wish to play [ l ], [ l ] buttons •...
Control Unit Connections Wiring Audio Harness Preamp Outputs Monitor 1 &2 Ouputs CD Changer Inputs Aux 1 & 2 Inputs Data Bus from Main Unit Aux 3 Input Antenna Input Sirius Input or Blaupunkt Signal Controller Connection...
General Operation General Operation The following are key explanations for common operations. - “FUNCTION modes will be activated by holding a key for 1 or more seconds. - All the OSD and front LCD displays remain visible for 3 seconds. Turning the Unit ON Main Unit: press “Blue”...
General Operation Adjusting the Volume - Use VOLUME to adjust the sound level Main unit: press Volume + or – to increase or decrease volume Remote: press Volume /\ or \/ to increase or decrease volume Mute - Activate/Deactivate the mute mode. Main unit: press POWER key and release (less than 2 seconds) Remote: press MUTE button...
Monitor Tilting - Main unit : N/A - Remote: press TILT – or + to adjust screen angle up or down. Note: To tilt screen to flat position without closing, press FLIP button. Screen will return to original position when button is pressed again.
General Operation Selecting a Source - Main unit and Remote: press SRC button repeatedly to toggle through sources. - Source outline : RADIO > DISC > CD-C > AUX1 > AUX2 > AUX3 Note: CD-C is activated only when a CD-Changer is connected Audio Mode Control Sound Field Control Dolby ProLogic II...
Down Mix - Reduces multiple channels to a fewer number of channels. - Remote: press Down Mix - Toggles on and off. Front LCD Color Change - Changes the color of Front LCD - Remote: press LCD button repeatedly to toggle between colors. - Sky Blue >...
Playback Mode Functions (Radio) Radio Mode Indication Preset Channel & Frequency Information Station Name is being displayed on RDS / Sirius model - These are the basic steps necessary to operate the radio - Press SRC button on the remote or main unit to select the tuner Station Information (RDS,...
Page 21
BAND Selection (FM1 > FM2 > FM3 > AM) - Manual Tuning • Main unit / Remote: press l or l button(s) to tune up or down frequencies. Playback Mode Functions (Radio) - Seek Tuning • Main unit: press[ l ]or [ l ] button(s) and hold. •...
Page 22
Playback Mode Functions (Radio) - Station Preset Memory • When you want to keep a station in memory, for quick one button access. Select the station desired. Press and hold the numeric key on front of main unit. Corresponding number on left of screen will confirm station in memory.
Title on Chapter on playing Playing DVD Mode Indication Sub-title Audio Out Indication Indication Playback Mode Functions (DVD) - To access DVD menu: Time - Main unit / Remote: press SRC button to toggle to DVD mode. Elapsed Note: By loading a DVD disc mode will change automatically. DVD will continue to play for back seat viewing when other modes Playing Indication...
Page 24
Playback Mode Functions (DVD) - Fast forward or reverse During playback, press [ ] button on Remote to Fast forward or Reverse. F/F or R speed switches each time the button is pressed (x2, x4, x6, x8). No sound or subtitles are played during fast-forward or reverse.
Page 25
- Repeat There are two repeat ranges for the DVD playback. Chapter (C) / Track (T) • Press REPEAT on remote, or RPT on head unit. • The repeat mode switches each time the button is pressed: Chapter repeat > Title repeat > Repeat off. Playback Mode Functions (DVD) - Zoom There are several magnifications of zoom.
Playback Mode Functions (CD) Track on playing CD-A Mode Indication Track Information CD-Text Visual Spectrum - To access CD-A menu: - Main unit / Remote: press SRC button to toggle to CD-A mode. Note: By loading a CD-A disc, mode will change automatically. Displays clock, Pro Logic etc.
Page 27
- Repeat • Press REPEAT on remote, or RPT on main unit. • The repeat mode switches each time the button is pressed : Track repeat on> Track repeat off - Random • Press MIX on remote or RDM on main unit. •...
Playback Mode Functions (CD Changer) Track on playing CD-C Mode Indication Track Information - To access CD-C menu: - Main unit / Remote: press SRC button to toggle to CD-C mode. Indicates clock, Pro Logic, CD-Changer mark, DISC number etc. - Play / Pause The unit will read and play the title loaded, automatically.
Page 29
- Searching by Track (Skip) Press [ l or l ] button on the main unit or remote, to easily move to the beginning of the next track. - Repeat • Press REPEAT on remote, or RPT on main unit. •...
Playback Mode Functions (MP3 CD) File on playing Mode Indication Folder Information File list ID3 Tag - To access MP3 menu: - Main unit / Remote: press SRC button to toggle to CD-A mode. Note: By loading a MP3 disc, mode will change automatically. - ID3 TAG will be shown at the bottom of the screen.
- Random • Press MIX on remote or RDM on main unit. • The random mode switches each time the button is pressed: Folder Random > Disc Random > Random off. - Scan Use this function to search for a song by playing an intro of the discs tracks for 10 seconds, then moving to next track repeatedly.
Playback Mode Functions (Navigation) NAVI Mode - Press NAVI button on remote or main unit for direct activation of navigation. - Press NAVI button again to resume previous mode. Note: No OSD will be visible on the monitor when the Navigation is connected through optional RGB connector.
DVD Setup - Press SETUP button on the remote and press SRC to move to DVD setup mode. Note: The DVD setup mode is the initial mode when Set-Up is activated. Language Setup - Press SETUP button on the remote and press SRC to move to DVD setup mode - Press [ ] button to activate Language setup and press the...
Menu Settings Parental Control - Press SETUP button on the remote and press SRC to move to DVD setup mode - Press [ ] button to activate Parental Control setup and press the ENTER button. - Press [ ] button to select setting within chosen header. Press the ENTER button to select.
Audio Effect Control Press SETUP button on the remote and press the SRC button repeatedly to move to Audio setup mode - Press [ ] button to activate the Input Level setup menu and press the ENTER button. - Press [ ] button to select (Prologic 2, SFC or Down Mix) header press the ENTER button.
Menu Settings 7 Band Equalizer Press SETUP button on the remote and press the SRC button repeatedly to move to Audio setup mode - Press [ ] button to activate the 7 Band Equalizer setup menu and press the ENTER button. - Press [ or ] button to select preset EQ and press SRC to exit.
Speaker Delay Setup Press SETUP button on the remote and press the SRC button repeatedly to move to Audio setup mode - Press [ ] button to activate the Speaker Delay menu and press the ENTER button. - Press [ ] button to select (Rear, Center,) header press the ENTER button.
Menu Settings Dynamic Range Setup Press SETUP button on the remote and press the SRC button repeatedly to move to Audio setup mode - Press [ ] button to activate dynamic range setup and press [ENTER] button. - Press [ or ] button to select + or – dynamic range. Note: The level varies upon the sequence following: OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, Full.
Monitor Tilt Press SETUP button on the remote and press the SRC button repeatedly to move to Screen setup mode - Press [/\ or \/] button to activate the Tilt menu and press the ENTER button. - Press [/\ or \/] button to select (Tilt, Position) header press the ENTER button.
Menu Settings Extra Setup Press SETUP button on the remote and press the SRC button repeatedly to move to USER setup mode ID Code Setup Protects your radio from theft by having an ID code. The radio will ask for the code if disconnected from battery power. Press SETUP button on the remote and press the SRC button repeatedly to move to USER setup mode - Press [...
Page 41
- Press [ ] button to select (Preview, IMG Swing) header press the ENTER button. - Press [ or ] button to select setting Press the ENTER button. Note: User can select the image to use as wallpaper for playback modes Radio, MP3, Audio CD, and CD-C.
Menu Settings - Select image swing function. Note: With the Image Swing function ON the wallpaper will change after every song played on Audio-CD, MP3 mode. In Radio mode the wallpaper will change every 5 minutes. Up to 7 images can be loaded.
Page 43
Menu Settings - Select CLEAR to delete current image from memory.
Menu Settings - Select UPDATE to choose current image and store as wallpaper.
Page 45
Menu Settings - Select UPDATE to choose current image and store as wallpaper. - Once stored, the image will be displayed on the monitor as wallpaper. You may select and store up to seven images. - Press RETURN to finish and return to initial mode. Note: When finished, the CD-ROM will eject automatically.
Menu Settings Wallpaper Change - In order to change the wallpaper in playback mode. - Main unit: N/A - Remote: press DISP/WALLPAPER. This will toggle through all saved images. Adjust Date & Time Press SETUP button on the remote and press the SRC button repeatedly to move to USER setup mode - Press [ ] button to activate Adjust Date &...
External Source Setup Press SETUP button on the remote and press the SRC button repeatedly to move to USER setup mode Press [ ] button to select External Source Setup mode and Press the [ENTER] button. - Press [ ] button to select (Navi, Camera, Reverse, Monitor 1, Monitor 2) header;...
Page 48
Menu Settings - Select Aux1, Aux2 or Aux3 input ON/OFF. - Select AUTO to apply the video source selected at the main unit. - Select Monitor 1 and choose one of the following: (DISC/RADIO/Aux1/Aux2/Aux3) for independent monitor 1 source, press the ENTER button. Note: If no input is connected to Aux1, Aux2 or Aux3 turn OFF.
We shall not be liable for any incidental, consequential, special or punitive damages arising from the sale or use of any Blaupunkt car audio and video products, whether such claim is in contract or tort. No attempt to alter, modify, or amend this warranty shall be effective unless authorized in writing by an officer of Robert Bosch Corporation.
Page 52
Copyright 2003 by the Robert Bosch Corporation Blaupunkt and the blue dot are registered trademarks of Blaupunkt GmbH. No portion of this work may be reproduced in any form without the written consent of the Robert Bosch Corporation Printed in Korea (9/03)
Page 53
LASER APPARAT Copyright 2003 by the Robert Bosch Corporation Blaupunkt and the blue dot are registered trademarks of Blaupunkt GmbH. No portion of this work may be reproduced in any form without the written consent of the Robert Bosch Corporation...
Page 54
Chicago IVDM-7002 Main Unit & Control Unit Connections 12 V Constant (Yellow) F I LTE R & FUSE BOX Ground (Black) 12 V Switched (Red) Illumination (Orange) Parking Brake (–) (Green) System Remote (Turn-On) Max. 100mA (Blue) Main Unit Data Bus...
Page 55
Chicago IVDM-7002 Control Unit Input & Output Connections *Caution • DO NOT connect any speaker wires to the metal body or chassis of the vehicle. • DO NOT connect the speaker common (-) wires to each other. • Connect each speaker wire directly to each speaker terminal.