Summary of Contents
-
Page 2
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK Technologies Co., Ltd.
-
Page 3
CE Declaration of Conformity For the following equipment: TL-WN620G Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic...
-
Page 4
The equipment was passed. The test was performed according to the following European standards: EN 300 328 V.1.4.1 (2003) EN 301 489-1 V.1.4.1 (2002) / EN 301 489-17 V.1.2.1 (2002) EN 60950-1: 2001 European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz;...
-
Page 5: Table Of Contents
Package Contents... 1 Chapter 1: Introduction... 2 1.1 Overview of the product ... 2 1.2 Features... 2 1.3 LED Status ... 2 Chapter 2: Installation Guide... 3 2.1 Hardware Installation ... 3 2.2 Software Installation... 3 2.2.1 Overview... 3 2.2.2 Software Installation for Windows 2000 ... 3 Chapter 3: Configuration ...
-
Page 6: Package Contents
User Guide • Other Helpful Information Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the TL-WN620G Wireless Adapter for assistance. 108M Wireless USB Adapter User Guide - 1 -...
-
Page 7: Chapter 1: Introduction, Overview Of The Product, Features, Led Status
TL-WN620G Chapter 1: Introduction 1.1 Overview of the product The TP-LINK TL-WN620G Wireless USB Adapter gives you the flexibility to install your PC or notebook PC in the most convenient location available, without the cost of running network cables. The adapter's auto-sensing capability allows high packet transfer of up to 108Mbps for maximum throughput, or dynamic range shifting to lower speeds due to distance or operating limitations in an environment with a lot of electromagnetic interference.
-
Page 8: Hardware Installation, Software Installation, Overview
2.2.1 Overview The Adapter’s Setup Wizard will guide you through the installation procedure for Windows 98Se, Me, 2000, XP. The Setup Wizard will install the TP-LINK TL-WN620G Wireless Utility and drivers. When you install the hardware before the software, the system will prompt “Found New Hardware Wizard”, click Cancel, and run the Setup Wizard program on the CD-ROM.
-
Page 9
To continue, click Next on the screen, figure 2-2. Click Cancel to end the Installation. Figure 2-2 TP-LINK TL-WN620G Installation Program The Setup Wizard will ask you to choose a Setup type in figure 2-3. It is recommended that you select Install Client Utilities and Driver. Select Install Driver Only to install driver only, select Make Driver Installation Diskette(s) to make the diskette(s) as the installation driver.
-
Page 10
TL-WN620G Click Browse to change the Destination Location of the software in figure 2-5. Click Next to continue the Installation. Click Back to return to the previous page, or click Cancel to end the Installation. Figure 2-5 Choose Destination Location The Setup Wizard will ask you to create a new folder or select one from the Existing Folders list shown in figure 2-6.
-
Page 11
TL-WN620G Figure 2-6 Select a Program Folder The Setup Wizard will notify you of how to proceed with the figure 2-7. Click OK to continue the Installation. Figure 2-7 Information Prompt While files are copying, you will see a warning box, shown in figure 2-8. Please select YES to continue installation.
-
Page 12
TL-WN620G 108M Wireless USB Adapter User Guide select Continue Anyway to continue installation. Figure 2-8a Windows XP warning box 10. After the files have been successfully copied, the screen in figure 2-9 will appear. Click OK to reboot the system.
-
Page 13: Chapter 3: Configuration, Current Status
If the icon is green, there is excellent signal strength and the RSSI is more than 20dB. Double-click the icon and the Current Status screen of TL-WN620G Wireless Client Utility will appear. From this screen, you can view the strength of the Adapter’s signal and the quality of its connection.
-
Page 14
Signal Strength - Shows the strength of the signal. Note: In the TL-WN620G Wireless Client Utility, access the General tab, Security tab, Advanced tab by clicking New or Modify on the Profile Management tab. Click Advanced to see advanced information about the program and its operations. For more information, please refer to the help file of the utility.
-
Page 15: Profile Management, Add Or Modify A Configuration Profile
TL-WN620G 3.2 Profile Management Click the Profile Management tab of the TL-WN620G Wireless Client Utility and the Profile management screen will appear, figure 3-3. The Profile Management tab provides tools to: Add a profile Edit a profile Remove a profile...
-
Page 16
TL-WN620G Profile Name - Identifies the configuration profile. This name must be unique. Profile names are not case sensitive. Client Name - Identifies the client machine. Network Names (SSIDs) - The IEEE 802.11 wireless network name. This field has a maximum limit of 32 characters.
-
Page 17
TL-WN620G Figure 3-5 Security tab of Profile Management Figure 3-6 Define Shared Keys Edit the Advanced tab Power Save Mode - • Maximum - Select maximum mode to let the access point buffer incoming messages for the wireless adapter. The adapter will detect the access point if any messages are waiting periodically.
-
Page 18: Remove A Profile, Switch Another Profile
TL-WN620G mode of the access point with which it associates. Wireless Mode when Starting an Ad Hoc Network - Specifies Super G or 2.4 GHz 54/11 Mbps to start an ad hoc network if no matching network name is found after scanning all available modes.
-
Page 19: Import A Profile, Export A Profile
TL-WN620G Click on the profile name in the Profile List. Click Activate. 3.2.4 Import a Profile From the Profile Management tab, click Import…. The Import Profile will then appear. Browse the directory where the profile is located. Highlight the profile name.
-
Page 20: Scan Available Networks, Auto Profile Selection Management
TL-WN620G 3.2.6 Scan Available Networks Click Scan on Profile Management, the Available Infrastructure and Ad Hoc Networks window will appear. Click Refresh to refresh the list at any time. Highlight a network name and click Activate to connect to an available network. If no configuration profile exists for that network, the Profile Management window will open the General tab.
-
Page 21: Diagnostics, Check Driver Information
TL-WN620G Figure 3-11 Auto Profile Selection Management Dialog 3.3 Diagnostics The Diagnostics tab of the TL-WN620G Wireless Client Utility provides buttons used to retrieve receiving and transmitting statistics. The Diagnostics tab does not require any configuration. The Diagnostics tab lists the following receive and transmit diagnostics for frames...
-
Page 22: Check Receive And Transmit Statistical Information
TL-WN620G driver. Access the adapter information from the Diagnostics tab. Card Name - The name of the wireless network adapter. MAC Address - The MAC address of the wireless network adapter. Driver - The driver name and path of the wireless network adapter driver.
-
Page 23: Appendix A: Specifications
TL-WN620G Appendix A: Specifications Normal Interface A-type USB 2.0 Connector Standards IEEE802.11b; IEEE802.11g Operating System Windows 98Se, Me, 2000, XP Transmission Indoor up to 100m, outdoor up to 300m (Standard transmission Distance distance, It is limited to the environment). Indoor up to 200m, Outdoor up to 830m (Adopt 2x to 3x eXtended...
-
Page 24: Appendix B: Glossary
802.11b and 802.11g products, for a coverage area that is up to nine times greater. A traditional 802.11b and 802.11g product transmission distance is about 300m, A TP-LINK 2x to 3x eXtended Range based client and access point can maintain a connection transmission distance may be up to 830m.
-
Page 25
TL-WN620G 108M Wireless USB Adapter User Guide as the only valid signal, and interference is inherently rejected (ignored). FHSS (Frequency Hopping Spread Spectrum) - FHSS continuously changes (hops) the carrier frequency of a conventional carrier several times per second according to a pseudo-random set of channels.
-
Page 26: Appendix C: Contact Information
TL-WN620G 108M Wireless USB Adapter User Guide Appendix C: Contact Information For help with the Installation or operation of the TP-LINK TL-WN620G 108M Wireless USB Adapter, please contact us. E-mail: support@tp-link.com Website: http://www.tp-link.com - 21 -...
Comments to this Manuals
Latest comments: