Using The Menus; How To Use The Menus; The Image Adjustment Menu - Toshiba TDP-T30 Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the operation buttons on the control panel (main unit side) and remote control.
p.16

How to use the menus

The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
2. Select a Category
Select a category by using .
There are following four
categories:
Image adjustment menu p.31
Display setting menu p.32
Default setting menu p.33
Status display menu p.34
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify the
items can be adjusted/set
by using .
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it
by pressing .
The figure shows displays given for operation instructions purposes. As the display
may differ depending on the item, use the following pages as a reference.
4. Back
Return button
Note
• Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the power cable is disconnected before this, or the power goes out,
then the data will not be saved.
Display the Setting display menu
Displays the current
adjustments and settings of
selected category.
Item shown with gray cannot
be adjusted with the current
input source.
to open the menu.
5. End
Press the MENU
button
The menu disappears.
This mark signfy that
there are options.
Press to display a
list of options.
30

The image adjustment menu

Use this menu to adjust image-related items.
Items that can be adjusted are marked with "Yes", and those that cannot are marked with "No".
Item Description
Contrast Adjust the image contrast.
Lower
Brightness Adjust the brightness of the image.
Darker
Color Adjust the color of the image.
Lighter
*1
Tint Adjust the tint of the image color.
Reddish
Sharpness Adjust the sharpness of the image.
Softer
Noise Set the function to reduce screen noise.
reduction
On (Enable)
Picture Press . Toggle the picture mode with
mode
/ .
Bright/Standard/True color
R-level Adjust red of the image color.
Less red
G-level Adjust green of the image color.
Less green
B-level Adjust blue of the image color.
Less blue
NTSC mode *1 Set the black level with
US: NTSC (US) mode
Japan: NTSC (JAPAN) mode
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is
set to US for other languages.)
Computer Y/P /P Video
B R
Yes Yes Yes
Higher
Yes Yes Yes
Brighter
No Yes Yes
Deeper
No No Yes
Greenish
No Yes Yes
Sharper
No Yes Yes
Off (Disable)
Yes Yes Yes
Yes Yes Yes
More red
Yes Yes Yes
More green
Yes Yes Yes
More blue
/ button. No No Yes
31
S-video
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes