UNI-T LM520 User Manual

LM520/LM520G/LM530/
LM530G/LM550/LM550G
Laser Level User Manual
I.Introduction
These series products adopt diode laser beam, the waveform
length of which is 635nm. The laser level can generate two
or more laser sectors and one plump down point. The sector
is formed by one horizontal beam and one or more vertical
beams that is reflected on the wall. The included angle of
every two vertical beams is 90˚. The focus of those beams
is called Zenith.
Automatic self-leveling
Indoor and outdoor(long distance) mode
360˚ rotatable ; Adjustable structure for accurate targeting
Water-proof, dirt-proof, sensitive buttons
II. Structure
Bubble vials
Vertical beam button
Horizontal beam button
Power switch/lock
Thumb screw
III. Operation instructions
1. Place the device on a tripod or a flat surface. Ensure the
device is approximately on horizontal level
Note: If the device is out of level, the laser will be shut down
automatically with audio alert.
2. Rotate the power switch clockwise to turn on the device.
Laser beams are emitted with the green LED ON.
3. Rotate the device to make the laser beam pointing at the
target.
4. Turn the thumb screw to locate the exact position.
5. After every task, turn the power switch anticlockwise to turn
off the device.
IV.Technical specifications
Model
Laser waveform length
Laser power
Laser grade
Laser line
Plump down point
Laser strengthening point
Horizontal accuracy
Vertical accuracy
Orthogonality accuracy
Plumb down point accuracy
Zenith accuracy
Emission angle
Operation distance
Self-leveling
Leveling range
Outdoor mode button
Outdoor mode
Battery type
Vertical laser
emission
Battery capacity(mAh)
window
Working hours
Power indicator
Horizontal laser
emission window
Charge indicator
Low power indicator
Power supply adaptor
V.Accessories
Adjustable bracket
User manual
Lithium battery
Kit box
VI.Maintenance
Never let any liquid get inside the device. Never immerse
any part of the device into a liquid.
Avoid shock and drop during operation and storage.
Please turn off the device before moving the device or it
may affect the accuracy.
Keep the laser emission window clean. Use soft cloth to
wipe the glass lens if there is dirt.
Take off the battery and store the device in the kit box if
the device is not in use for long time.
LM 5 20 LM530 LM550
635nm
2 3 5
√ (waveform length=650nm)
±0.5mm/1.5m
NA ±1mm/7m
Vertical line≥110˚, horizontal line≥130˚
Indoor operating radius≈10m; With corresponding laser detector, operating radius=50m
Gravity pendulum-magnetic damp
Polymer lithium battery
1050 1800
About 6 hours (with all laser tubes on)
Backlight of horizontal bubble locator is ON
√(Backlight of horizontal bubble locator is flashing)
Strap
Goggles
Target card
Manufacturer:
No6, Gong Ye Bei 1st Road,
Songshan Lake National High-Tech Industrial
Development Zone, Dongguan City,
Guangdong Province, China
Tel: (86-769) 8572 3888
Fax: (86-769) 8572 5888
Postal Code: 523 808
http://www.uni-trend.com
Headquarters:
Rm 901,9/F,Nanyang Plaza,57 Hung To
Road, Kwun Tong, Kowloon,Hong Kong
LM520G LM530G LM550G
532nm
<1 mW
CLASS II
2 3
√
±1mm/7m
±1mm/7m
90˚±60"
NA ±1mm/7m
±2.5°
√
1050 1800
√
DC 4.5V
5