National Cycle N5113 Installation And Owner's Manual

Thank you for purchasing a National Cycle® product. Please read these instructions carefully and thoroughly
before beginning work. Dealers if installing this product for a customer please give them this manual. It con-
tains information needed to properly maintain and use this product.
Report any missing parts directly to National Cycle, Inc. There is important code information located on the
back of the package that will be necessary when reporting missing parts.
Special notes and cautionary measures
Attention
which can prevent damage to the accessory
or motorcycle.
PARTS LIST
Item Part Number
1
2
3
1
2
3
4
5
6
10-117841-000
BAG#1065
7 55-585020-000
8 49-490080-000
9 75-762015-000
10 34-340266-000
11 51-516000-000
12 75-766086-000
12x6
7x13
8x13
5
9x12
11x4
10x4
708-343-0400 / Fax: 708-343-0625 / www.nationalcycle.com / e-mail: info@nationalcycle.com
Description
Wing Deflector, Dark Tint, Upper
Wing Deflector, Dark Tint, Left, Lower
Wing Deflector, Dark Tint, Right, Lower
Wing Deflector, Light Tint, Upper
Wing Deflector, Light Tint, LH Lower
Wing Deflector, Light Tint, RH Lower
Bracket, Left
Bracket, Right
Drill Bit
Template, Left and Right Side
Screw, 4-20 x 1/4"
Washer M3
Washer, Neoprene
Stand-off
Screw, 10-32 x 3/8"
Circle, Mylar
1
2
3
Right and Left side of Motorcycle is
determined while sitting on the bike.
©2011 National Cycle, Inc. PO Box 158, Maywood, IL 60153-0158 USA
INSTALLATION AND OWNER'S MANUAL
Wing Deflectors, Fairing Mount N5113 and N5114
for 2012 HONDA GL1800 and GL1800 AB
Tips for facilitation of operation, control
Note
and adjustment, as well as maintenance.
4
• 5mm Hex Key Wrench
• 1/2" Socket and Torque Wrench
• Thread Locker (Loctite 271® or equivalent)
• Scissor
• Tape
• Drill Press or Hand Drill, Not Shown
• Flat Piece of Wood (for use when drilling)
• 1/8" Hex Key Wrench
• #1 Phillips Screw Driver
Page 1 of 4
Qty. Note
2 Contained in N5113
1 Contained in N5113
1 Contained in N5113
2 Contained in N5114
1 Contained in N5114
1 Contained in N5114
1
1
1 Used in Installation
1 Center hole scale marked
13
13
12
4
4
6
6
10-117840-000 08 /11