Toshiba 1700 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. UPS
  5. Satellite 1700 Series
  6. User manual

Toshiba 1700 Series User Manual

Uninterruptible power system single phase 1.5/2.0/2.4 kva
Hide thumbs Also See for 1700 Series:
Table of Contents

Advertisement

Quick Links

UNINTERRUPTIBLE POWER SUPPLIES
1700 Series
User Manual
1700 Series
Uninterruptible Power System
Single Phase 1.5/2.0/2.4 kVA

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 1700 Series

Summary of Contents for Toshiba 1700 Series

  • Page 1 UNINTERRUPTIBLE POWER SUPPLIES 1700 Series User Manual 1700 Series Uninterruptible Power System Single Phase 1.5/2.0/2.4 kVA...

  • Page 2: Disclaimer

    Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser's purposes, the matter should be referred to the local Toshiba sales office. The contents of this instruction manual shall not become a part of or modify any prior or existing agreement, commitment, or relationship.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SECTION Disclaimer ... 3 Table of Contents... 4 General Safety Instructions ... 5 Important Safety Instructions ...6-7 Inspection/Installation ... 8 Inspection of the New UPS ...8 Installation Precautions ...8 Operating Precautions ...8 External Layout ... 9 Electronics Module...9 Battery Modules ...10 UPS Connections ...

  • Page 4: General Safety Instructions

    GENERAL SAFETY INSTRUCTIONS Warnings in this manual appear in two different ways: Danger warnings - The danger warning symbol is an exclamation mark enclosed in a triangle that precedes the large bold letters spelling the word "DANGER". The Danger warning symbol is used to indicate situations, locations, and conditions that exist and can cause serious injury or death: DANGER...

  • Page 5: Important Safety Instructions

    The maximum ambient temperature in which this UPS unit should be operated or stored is 104 °F (40 °C). The batteries for the Toshiba 1700 Series 1.5 and 2.4kVA UPS are housed in a self-contained battery module. This module should not be opened under any circumstances.
  • Page 6 INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ CONSERVER CES INSTRUCTIONS. contient des instructions importantes concernant la sécurit. Une batterie peut présenter un risque de ATTENTION choc électrique, de brûlure par transfert d’énergie. Pour le remplacement, utiliser le même ATTENTION nombre de batteries du modèle suivant. L’élimination des batteries est ATTENTION réglementée.

  • Page 7: Inspection/Installation

    Inspection/Installation Inspection of the New UPS Equipment Upon receipt of the UPS, a careful inspection for shipping damage should be made. After Unpacking: 1) Check the unit for loose, broken, bent or otherwise damaged parts. If damage has occurred during shipment, keep all original packing materials for return to shipping agent.

  • Page 8: External Layout

    (unless appropriate sizing is done by a Toshiba applications engineer, or other qualified personnel). 5) Do not insert metal objects or combustible materials in the unit's ventilation slots.

  • Page 9: Battery Modules

    Battery Module Figure 2 Battery Module Layout UPS Connections Standard Module Connections The illustration on the following page shows the proper assembly of the two modules that make up the standard unit. If additional battery modules are being installed with the standard unit see page 20. For all other option modules see page 21.
  • Page 10 Standard Module Connections (cont’d) If two modules are to be stacked on top of each other, they should be interlocked to reduce the chances of the top module being knocked over. Modules do not have to be stacked for the system to operate.

  • Page 11: Operating The Ups

    Operating the UPS Display Panel Layout Function Control Button Starting the UPS System Once the modules have been connected as shown in the preceding section (UPS Connections, page 10) the UPS system is ready to be started. There are two ways to start the system: from AC input power (if present) or from batteries.

  • Page 12: Starting On Dc Power

    Starting on DC Power If no AC power source is available, or if the AC input power is outside of the allowable range for voltage or frequency, the UPS can be started from battery power. The length of UPS operation time on battery power depends on the number of attached battery modules and the amount of load the UPS is supporting.

  • Page 15: Battery Backup Time

    Load Shed Function The 1700 Series includes a load shed function. During battery backup operation, this function allows the load connected to two of the receptacles (figure 1, page 9) to be turned off in an effort to conserve power for more critical loads.

  • Page 16: Battery Check Function

    Fan Speed The 1700 Series UPS has variable speed fans. The fan speed will vary depending on a number of factors. As the load placed on the UPS increases the fan speed will increase. The temperature of the environment the UPS is operating in can also cause the fan speed to increase.
  • Page 17 unit is in programming mode. (If at anytime while the UPS is in the programming mode there is one minute of inactivity the UPS will automatically exit the programming mode and return to bypass operation.) What follows is a step by step guide to navigating in the programming mode, followed by a detailed description of each option.
  • Page 18 Function Control button successive times will increase the load shed level in 20% increments. A.2 Once the option is set to the desired level, press and hold the Function Control button. This will save the new load shed level setting. The UPS will indicate that the value has been stored by blinking the LEDs.

  • Page 19: Fixed Frequency Mode

    Fixed Frequency Mode The 1700 Series UPS has the option of operating in a fixed frequency mode. Normally the UPS operates in the frequency auto- detect mode. If a specific output frequency is required (i.e. 50Hz or 60Hz) the UPS can be set at the factory to supply the desired frequency regardless of the input frequency (input frequency must be within allowable limits, see Specifications on page 31).

  • Page 20: Other Option Modules

    Other Option Modules There are a number of other optional modules that can be ordered for the 1700 Series UPS system. Table 3 shows some of the available option modules. For information about options not listed here contact Toshiba’s UPS Marketing Department at (800) 231- 1412 or by e-mail at toshibaups@tic.toshiba.com.

  • Page 21: Communication Interface

    Communication Interface Dry Contacts The remote contacts interface is a standard feature. It is provided through solid state relays with contacts through a DB9 male connector located on the back of the UPS (refer to the Communication Option User Manual for a more detailed description of this option).
  • Page 22 • If an optional RemotEye™ SNMP interface card is installed in the UPS only one method (SNMP or RS-232C) will function at a time. • For a description of the cable required to connect to a Toshiba UPS system refer to the Communication Option User Manual or contact Toshiba’s UPS Marketing Department at (800) 231-1412 or...

  • Page 23: Option Card Slot

    In many cases, after the condition that caused the fault is corrected the unit will automatically transfer back to normal mode. For those cases where the unit does not transfer back automatically contact your Toshiba UPS service representative at 1- 877-867-8773 (outside the U.S. call 713-466-0277).

  • Page 30: Storage Of Ups Equipment

    It is illegal to dump lead-acid batteries in landfills or dispose of improperly. Please help our Earth by contacting the environmental protection agencies in your area, the battery manufacturer, or call Toshiba toll-free at (800) 231-1412 for more information about recycling.

  • Page 31: Preventative Maintenance/Parts Replacement

    Preventive and Scheduled Maintenance/Parts Replacement Preventive Maintenance Toshiba's 1700 Series of UPS systems have been designed to provide years of trouble-free operation requiring a minimum of preventive maintenance. The best preventive measure is to keep the area around the unit, particularly the air inlet vents, clean and free of moisture and dust accumulations.

  • Page 32: Appendices

    Appendix A: Specifications Model Number UF1A1A015C6(T) Capacity 1500VA (1.05KW) 2000VA (1.40KW) 2400VA (1.68KW) Input voltage Single phase 120VAC, +20% to -50% Input frequency Input capacity 1500VA Input power factor Approximately unity (0.95 to 1.0) Input voltage Single phase 120VAC, ±10% Output voltage Single phase 120VAC Overload rating...

  • Page 33: B: Fan Speed Control

    Appendix B: Fan Speed Control The fans in the 1700 Series will operate at any of four different speeds depending on the environment and system conditions. In the first stage the fans are off. As the load and or the temperature increase the fans will subsequently go to low, medium or high speed as required.

  • Page 34: C: System Overload Rating

    1 minute, and 150% for 30 seconds. If the overload continues the unit will switch to bypass mode. When in bypass mode the 1700 Series overload capacity is limited by the input breaker. The following graph shows the response of the breaker depending on the applied load.

  • Page 35: D: Parallel Operation

    Appendix D: Parallel Operation The 1700 Series UPS offers a standard feature that allows the unit to operate with very low input voltage without de-rating the output power. If the input voltage drops below a certain point the unit will switch to parallel mode.

  • Page 36: E: Bypass Undervoltage / Overvoltage

    Appendix E: Bypass Undervoltage / Overvoltage When the 1700 Series UPS is in bypass mode the undervoltage and overvoltage limits are restricted to +/-10% of the rated input voltage. If the input voltage is outside of this voltage window the UPS output will be turned off.

  • Page 37: F: Unit Configuration Options

    Appendix F: Unit Configuration Options The following chart shows the configuration options for each base model UPS. Available Option Model Number Description UF1-BC-087 UF1-IO-015-6BG 1500VA UF1-IO-015-6AA UF1A1A015C6 Electronics Module UF1-IO-015-6EE UF1-IO-015-XEE UF1-BC-087 1500VA Electronics UF1-IO-015-6BG UF1A1A015C6T Module with internal isolation transformer UF1-IO-015-6EE UF1-BC-087...

  • Page 38: G: Weights And Dimensions

    Appendix G: Weights and Dimensions Module Module Weight Model No. Pounds UF1A1A015C6 UF1A1A015C6T UF1A1A020C6 UF1A1A024C6 UF1-BC-087 Electronics Module Dimensions are in inches [mm] Battery/Option Module Dimensions are in inches [mm] Shipping Weight Kilograms Pounds Kilograms...

  • Page 39: Warranty Policy

    TIC Bill of Lading. Note 2: For the 1700 Series the warranty applies if the unit is sent and returned (paid for) by the user to/from the Toshiba plant or a Toshiba designated Authorized Service Center. If any UPS, part of UPS, and/or BATTERY fails to conform or is defective then TIC will repair or replace it at TIC’s option.
  • Page 40 PROCEDURE User must contact TIC via e-mail upsservice@tic.toshiba.com, or phone 1-877-867-8773 (outside the U.S. call 713-466-0277), no later than 90 days after User’s discovery of occurrence or defect in UPS, UPS part, and/or BATTERY but in no event after the expiration of the respective warranty period.
  • Page 41 Notes:...
  • Page 42 Notes:...
  • Page 43 TOSHIBA TOSHIBA INTERNATIONAL CORPORATION INDUSTRIAL DIVISION 13131 West Little York Rd., Houston Texas 77041 Tel: (800) 231-1412 Fax: (713) 466-8773...

This manual is also suitable for:

1500 va2000 va2400 va

Table of Contents