Datalogic Gryphon-HC Series Instructions

I N S T R U C T I O N S
Gryphon-HC Handheld Products Cleaning Procedure
Applicable to Gryphon I GD4XXX-HC, GM4XXX-HC, 
GBT4XXX-HC Healthcare Models
Exterior surfaces and scan windows exposed to spills, smudges or
debris accumulation require periodic cleaning to ensure best per-
formance during scanning operations.
Use a soft, lint-free cloth or lens tissue to clean the product.
Dampen it with an approved cleaning agent. Gently wipe all sur-
faces.
Use approved cleaning agents only (see Table 1 below).
Do not use abrasive or aggressive cleansing agents or
abrasive pads to clean scan windows, contacts, or
plastics.
Do not spray or pour liquids directly onto the unit.
CAUTION
Item
Sani-Cloth® HB, Sani-Cloth® Plus,
Super SaniCloth®
Hepacide Quat Il
Alcohol Wipes
CaviWipes™
100% Gentle dish soap and water
*When using Ammonia Chloride Solutions be sure to remove residue from the contacts after cleaning.
Corded Models
Table 1. Tested Cleaning Agents
Description
Quaternary Ammonium Chloride
solution
Virucidal disinfectant cleaner
70% Isopropyl Alcohol
Isopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
Item
Virex® 256
409® Glass and Surface Cleaner
Windex® Blue
Clorox® Bleach
BSR idware GmbH
Jakob-Haringer-Str.3
A-5020 Salzburg
Web: www.bsr.at
Description
n-Alkyl Dimethyl Benzyl 
Ammonium Chloride; Didecyl
Dimethyl Ammonium Chloride
Isopropanol (Isopropyl Alcohol), 
2 propanol, dimetil carbinol
Isopropyl Alcohol
Sodium Hypochlorite; 
Sodium Hydroxide


