Monitoring Of Power Condition - Toshiba NB500 Series User Manual

Toshiba laptop user manual
Hide thumbs Also See for NB500 Series:
Table of Contents

Advertisement

AC adaptor not
connected

Monitoring of power condition

As shown in the below table, the DC IN/Battery and Power indicators on
the system indicator alert you to the computer's operating capability and
battery charge status.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing amber
Amber
Green
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.
User's Manual
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Battery charge is
above low battery
trigger point
Battery charge is
below low battery
trigger point
Battery charge is
exhausted
No battery
installed
The battery charge is low, the AC adaptor must be
connected in order to recharge the battery.
Or, Indicates a problem with the power supply. You
should initially try plugging the AC adaptor into
another power outlet - if it still does not operate
properly, you should contact your reseller or
dealer.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does not
light.
Power on
Power off
(no operation)
• Operates
• LED: off
• Operates
• LED: flashes
amber
Computer shuts
down
• No operation
• LED: off
5-2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents