Related Manuals for Gaggia 10002842
Summary of Contents for Gaggia 10002842
- Page 1 Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. - Page 4 This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user.
-
Page 6: Table Of Contents
CONTENTS - GENERAL INFORMATION ...7 APPLIANCE ...8 ACCESSORIES ...8 INSTALLATION ...9 STARTING THE MACHINE ...9 “AQUA PRIMA” WATER FILTER (OPTIONAL) ...11 CONTROL PANEL ...12 ADJUSTMENTS ...14 COFFEE STRENGTH ...14 DRIP TRAY HEIGHT ADJUSTMENT ...14 COFFEE GRINDER ADJUSTMENT ...15 COFFEE VOLUME ADJUSTMENT PER CUP ...15 COFFEE BREWING AND HOT WATER DISPENSING ...16 COFFEE BREWING ...16 HOT WATER DISPENSING ...17... -
Page 7: General Information
GENERAL INFORMATION This coffee machine is suitable for preparing espresso coffee using coffee beans and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by: •... -
Page 8: Appliance
APPLIANCE - Cup stacking surface Control panel E-Plus System Dispensing head Drip tray + grill Hot water / steam knob Hot water / steam spout Water tank ACCESSORIES - Grinder adjustment key “Aqua Prima” water fi lter (optional) Coffee bean hopper Socket for power cable Power cable Coffee bean hopper cover... -
Page 9: Installation
STARTING THE MACHINE - Make sure the power button is not pressed and that the machine is turned off. Check the machine features on the label on the bottom of the appliance. Lift the cover of the coffee bean hopper. Fill the tank with fresh drinking water up to the MAX level. - Page 10 Place a container beneath the steam spout. Turn the knob until it is in the rest position ( ). When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small amount of water is dispensed; during this phase, the lights fl ash counterclockwise. Wait for this cycle to be completed.
-
Page 11: Aqua Prima" Water Filter (Optional)
“AQUA PRIMA” WATER FILTER - “AQUA PRIMA” WATER FILTER (OPTIONAL) To improve the quality of the water you use, it is recommended to install the “Aqua Prima” fi lter. Before using it, leave the fi lter immersed in the tank for 30 minutes. Remove the “Aqua Prima”... -
Page 12: Control Panel
CONTROL PANEL - Alarm light to empty the coffee grounds drawer: • permanently on: signals the need to empty the grounds drawer; this operation must be performed with the machine turned on (steps 1 and 2, page 24). • Coffee dose adjusting knob (see page 14). Coffee button: Descaling light: •... - Page 13 Alarm light: • permanently on (one or more events): signals the machine is out of coffee, that the water tank is empty, the need to empty the drip tray (in this case, also empty the coffee grounds drawer in order to prevent failures). •...
-
Page 14: Adjustments
ADJUSTMENTS - COFFEE STRENGTH - The E-Plus System has been carefully designed to give your coffee the intense taste you desire. Simply turn the knob and you will notice that the coffee goes from mild intensity to strong intensity. E-PLUS SYSTEM - ESPRESSO PLUS SYSTEM To adjust the intensity of the brewed coffee. -
Page 15: Coffee Grinder Adjustment
COFFEE GRINDER ADJUSTMENT - The machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed by means of the pin located inside the coffee bean hopper. This must be pressed and turned using the supplied key only. -
Page 16: Coffee Brewing And Hot Water Dispensing
COFFEE BREWING AND HOT WATER DISPENSING COFFEE BREWING - The coffee brewing cycle can be interrupted at any moment by pushing the the machine dispenses half of the entered quantity and briefl y interrupts dispensing in order to grind the second serving of coffee. -
Page 17: Hot Water Dispensing
HOT WATER DISPENSING - Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Adjust the height of the drip tray. Wait for the container to be fi... -
Page 18: Cappuccino
CAPPUCCINO - CAPPUCCINO - Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. Use the appropriate handle only. Adjust the height of the drip tray. Press the button to select the steam function. - Page 19 Drain any residual water and wait until the spout ejects steam only. Turn the knob until the position is reached. Press the button to dispense water. The indicator fl ashes. Turn the knob until it is in the rest position ( ). Froth the milk by gently swirling the container.
- Page 20 CAPPUCCINO - When the machine ready indicator is permanently on, turn the knob until it is in the rest position. Remove the container. When the spout is cold, disassemble it and wash it carefully. Retirer le récipient. After frothing the milk, brew coffee into the cup for a creamy cappuccino.
-
Page 21: Descaling
DESCALING - When performing a descaling cycle, it is necessary to be present during the entire process (about 40 minutes). Caution! Do not use vinegar as a descaler. The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling solution. - Page 22 DESCALING Turn the knob until the position is reached. Dispense the descaling solution into the container for 15 seconds. Press the button to turn off the machine. After 10 minutes, turn on the machine again. Turn the knob until it is in the rest position ( ).
- Page 23 Place a large container beneath the steam spout. Fill the tank again with fresh drinking water. Once descaling has been performed: 1. Install the “Aqua Prima” fi lter, if available; 2. Prime the circuit as described on page 10, from step 7. Turn the knob until the position is reached to empty the water tank.
-
Page 24: Cleaning And Maintenance
CLEANING AND MAINTENANCE MAINTENANCE DURING OPERATION During normal operation, the message for emptying the coffee grounds may appear on the display (see page 12). This operation must be performed when the machine is on. Remove the coffee grounds drawer. If the grounds drawer is emptied with the machine turned off, or when the alarm light to empty the drawer is not on (see page 12), the count of the coffee portions contained in the grounds drawer is not restarted. -
Page 25: How To Clean The Machine
HOW TO CLEAN THE MACHINE - The machine must be cleaned at least once a week. Do not immerse the machine in water or place any of its parts in a dishwasher. Do not use alcohol, solvents, benzene and/or abrasive objects to clean the machine. The water left in the tank for several days must be disposed of. -
Page 26: Cleaning The Brew Group
CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the coffee grounds drawer as shown in fi g. 1 on page 24. Once you have washed and inserted the Brew Group, insert the grounds drawer and close the service door. Lubricate the Brew Group after approximately 500 brewing cycles. - Page 27 Apply the grease evenly on both side guides. The lever on the rear part of the group must be in contact with the Brew Group base. Make sure the group is in rest position; the two references must match. Insert the washed and dried Brew Group.
-
Page 28: Troubleshooting
TROUBLESHOOTING ROBLEMS The machine does not turn on. Coffee is not hot enough. Hot water or steam is not dispensed. Coffee has little crema. The machine takes a long time to warm up or the amount of water dispensed from the spout is too little. -
Page 30: Safety Rules
SAFETY RULES N CASE OF EMERGENCY Immediately unplug the cable from the outlet. SE THE APPLIANCE ONLY - Indoors. - To prepare coffee, dispense hot water, froth milk or heat beverages using steam. - For domestic use only. EVER USE THE APPLIANCE For purposes other than those indicated above, in order to avoid danger. - Page 32 SAFETY RULES AILURES - Do not use the appliance in case of sure or suspected faults such as after falls. - Any repairs must be performed by an authorized customer service centre. - Do not use the appliance with a defective power cable. If damaged, the power cable must be replaced by the manufacturer or authorized service centre.
-
Page 34: Technical Data
TECHNICAL DATA - TECHNICAL DATA • Nominal voltage • Power rating • Power supply • Shell material • Size (w x h x d) • Weight • Cable length • Control panel • Water tank • Pump pressure (bars) • Boiler •... - Page 35 EC DECLARATION OF CONFORMITY - EC 73/23, EC 89/336 - EC92/31, EC93/68 Strada prov. per Abbiategrasso, snc - 20087 Robecco sul Naviglio - Milano . Italy declare under our responsability that the product: - to which this declaration relates is in conformity with the following standards or other normative documents: •...
- Page 36 GAGGIA S.p.A. 20087 Robecco sul Naviglio - MI - Italia Tel. +39 02949931 Fax +39 029470888 The manufacturer reserves the right to change the features of the product without prior notice. Internet: www.gaggia.it E-mail: gaggia@gaggia.it...