Page 2
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir Åbn her...
Page 4
CONTROLS button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS con- venience function on/off (radio data system). Selects variable radio texts. BND button (band), source se- lection for radio mode, selection of FM memory levels and the wavebands MW and LW...
CDC A 02. The CD changers CDC A 5 and CDC A 071 can also be connected if you use an adapter cable (Blaupunkt no.: 7 607 889 093). The Blaupunkt CDC A08 CD changer is included with the Carolina DJ52.
Flip/release panel Theft protection Your car radio is fitted with a flip/release panel to guard against theft. Without this panel, the unit is worthless to the thief. Protect your unit from theft by taking the flip/release panel with you every time you leave the car.
SWITCHING ON/OFF Switching on/off There are various ways of switching the car radio on and off, as described be- low. Switching on/off using the ignition If the car radio is correctly connected to the ignition and has not been switched off using the button 3, it is switched on/off simultaneously with the ignition.
For this you will need the cable with the follow- ing Blaupunkt number: 7 607 001 503. Your Blaupunkt dealer can tell you which navigation systems can be used with...
VOLUME ADJUSTMENT If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traf- fic announcement is not reproduced until the call or the speech output has finished. If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced.
Radio mode This unit is equipped with an RDS radio receiver. Many of the receivable FM sta- tions transmit a signal that not only car- ries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the dis- play as soon as it is received.
RADIO MODE Tuning into a station There are various methods available for tuning into a station. Automatic station search mode button :. Press the The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manual- Press either the Note: You can only tune into stations...
Storing stations automatically (Travelstore) You can store the six stations with the strongest reception in the region auto- matically (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process.
Page 14
RADIO MODE PTY-EON When the programme type has been selected and the search started, the car radio switches from the current station to a station featuring the selected pro- gramme type. Note: If no station with the selected pro- gramme type is located, a beep sounds and “NO PTY”...
Optimising radio reception High-frequency cut-off feature (HICUT) The HiCut function improves the sound during poor radio reception (only FM). If interference occurs, the treble is au- tomatically reduced and thus also the interference level. Switching HiCut on/off Press the MENU button 8. button : Press the repeatedly until “HICUT”...
TRAFFIC INFORMATION Traffic information Your car radio is equipped with an RDS- EON reception system. EON stands for Enhanced Other Network. When a traffic announcement (TA) is broadcast, your unit will automatically switch, within a broadcasting network, from a station which does not transmit traffic information to one that does.
Cassette Operation Cassette Play If there is no cassette in the device button 9. Press the The flip-release panel opens. Insert the cassette into the cassette slot with the open side to the right. Close the control unit. The cassette starts playing with the side that is facing upwards.
CASSETTE MODE Sampling All the Tracks on a Cassette (SCAN) Hold down the OK button ; for longer than two seconds. “CAS SCAN” appears in the display. Samples from all the tracks on the tape are played in ascending order. To halt the scan Press the OK button ;...
Skipping Blank Tape You can automatically skip sections of blank tape that last longer than 10 sec- onds. This requires the blank skip func- tion to be activated. Note: The blank skip can only be set if a cassette is being played. Switching Blank Skip On / Off Press the MENU button 8.
CD CHANGER MODE CD changer mode Note: Information on handling CDs, in- serting CDs and operating the CD changer can be found in the oper- ating instructions accompanying your CD changer. Starting CD changer mode Press the SRC button @ repeat- edly until “CHANGER”...
Random play (MIX) To play the tracks on the current CD in random order, press the but- ton 5 MIX >. “MIX CD” appears briefly on the display and MIX lights up. To play the tracks of all the inserted CDs in random order, press the button 5 MIX >...
CLOCK - TIME CLOCK - Time Briefly displaying the time / DIS 7 button briefly Press the to display the time. Setting the time Setting the time manually To set the time manually, press the MENU button 8. button : repeat- Press the edly until “CLOCKSET”...
Tone and volume balance You can adjust the sound settings for each source separately (radio, Cas- sette, CD changer, AUX and traffic an- nouncement). The volume distribution settings apply to all the audio sources. Note: You can only adjust the audio set- tings for traffic announcements whilst a traffic announcement is ac- tually being played.
X-BASS X-BASS X-Bass means increased bass at low volumes. Note: X-BASS can be adjusted separate- ly for each audio source (radio, Cassette, CD-changer and AUX). Setting X-BASS boost The X-BASS boost can be increased in steps from 1 to 3. “X-BASS-OFF”...
To connect up an external audio source, you will need an adapter cable (Blau- punkt no.: 7 607 897 093), obtainable from any authorised Blaupunkt dealer. Switching the AUX input on/off Press the MENU button 8. “MENU” appears on the display.