Magnavox AZ1101/11 Owner's Manual

AZ 1100 - Family CD Radio Cassette Recorder
AZ 1100 Family CD Radio Cassette Recorder
MAGNAVOX Visit our World Wide Web Site at http://www.magnavox.com
PHILIPS CONSUMER ELECTRONICS COMPANY
A Division of Philips Electronics North America Corporation
Knoxville, Tennessee 37914-1810, U.S.A.
printed in Hong Kong TC Text/RB/9614-3
% ^ &
*
1
2
3
4
5
6
7
8
9
0
English Français
1 VOLUME – to adjust the volume level pour régler le niveau sonore
2 Source selector – POWER ON/OFF switch and to select the sound source: POWER ON/OFF et pour sélectionner la source sonore : CD-TUNER-
CD - TUNER - TAPE TAPE
3 DBB (Dynamic Bass Boost) – to increase the bass level pour amplifier les fréquences basses
4 p – 3.5 mm headphone socket prise casque 3,5 mm
5 Cassette keys
Touches de la platine cassette
PAUSE ;
– to interrupt playback pour interrompre la lecture
STOP•OPEN 9 /
– to stop playback and open the cassette compartment pour interrompre la lecture et ouvrir le compartiment à cassette
SEARCH 5
– to fast forward the tape rembobinage rapide de la cassette vers l'avant
SEARCH 6 – to fast rewind the tape
rembobinage rapide de la cassette vers l'arrière
PLAY 1
– to start playback pour démarrer la lecture
RECORD 0
– to start recording pour démarrer l'enregistrement
6 CD buttons Touches du lecteur de CD
PLAY•PAUSE 2;
– to start or interrupt CD playback pour démarrer ou interrompre la lecture du CD
STOP 9
– to stop playback pour interrompre la lecture
SEARCH ∞ § – to skip or search a passage or a track
pour sauter ou rechercher un passage ou une plage spécifique
MODE – to select a different playback mode e.g. to SHUFFLE or pour sélectionner un mode de lecture différent (par ex.: SHUFFLE ou
REPEAT and to program track numbers REPEAT) et pour programmer les numéros de plages
7 POWER indicator – lights up when power supply is on s'allume lorsque l'appareil est branché sur secteur
8 CD display – to indicate CD functions indique les fonctions du lecteur de CD
9 FM stereo indicator – lights up when receiving FM STEREO s'allume lorsque l'appareil est en réception FM STEREO
0 Cassette compartment
Compartiment à cassette
! LIFT TO OPEN – to open the CD door pour ouvrir le compartiment du disque
@ Band selector – to select the wave band (FM-AM) pour sélectionner la bande de longueur d'ondes (FM-AM)
# TUNING – to tune to radio stations pour sélectionner les stations radio
$ Tuning dial pointer Indicateur de syntonisation
BACK PANEL PANNEAU ARRIÈRE
% BEAT CUT switch – for eliminating possible whistle tones during AM
pour éliminer les problèmes de sifflement lors d'enregistrements en
recordings AM
^ Telescopic antenna – to improve FM reception pour améliorer la réception en modulation de fréquence
& AC MAINS – for power cord prise pour le branchement sur secteur
* Battery door – to open the battery compartment
compartiment à piles
Return your Warranty Registration card today to
ensure you receive all the benefits you're entitled to.
• Once your Magnavox purchase is
registered, you're eligible to receive all
the privileges of owning a Magnavox
product.
Warranty
Verification
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Magnavox warranty.
Know these
s s a a f f e e t t y y
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
t This "bolt of lightning"
Owner's Manual
indicates uninsulated material
Mode d'emploi
within your unit may cause an
Instructivo de manejo
electrical shock. For the safety of
everyone in your household, please do
not remove product covering.
s The "exclamation point" calls
attention to features for
which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
1 2 3 WARNING
8 x C-cells - R14 FM AM
To reduce the risk of fire or electric shock,
do not expose this appliance to rain or
moisture.
CAUTION
Use of controls or adjustments or per-
formance of procedures other than herein
4 5 may result in hazardous radiation exposure.
SHUFFLE
SHUFFLE The set complies with the FCC-Rules, Part 15 and with
X 3
REPEAT 1
21 CFR 1040.10 and 1040.11.
ALL PROG SHUFFLE
X 2
REPEAT
ALL
PROG
SHUFFLE SHUFFLE
2;
REPEAT 1
SAFETY INSTRUCTIONS
X 1
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
6 7 8
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should
be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
1
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink,
! laundry tub, in a wet basement or near a swimming pool, etc.
@ 6. Carts and Stands - The appliance should be used only with a cart
9 0
or stand that is recommended by the manufacturer.
6A. An appliance and cart combination should be moved
# with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
$ combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location
CLASS 1 or position does not interfere with its proper ventilation. For
LASER PRODUCT example, the appliance should not be situated on a bed, sofa, rug,
A A B C
or similar surface that may block the ventilation openings; or, placed
in a built-in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
Español
para ajustar el volumen MAGNAVOX PORTABLE COMPACT DISC
interruptor de POWER ON/OFF (apagado/encendido) y selector de la
This product must be carried in for an exchange.
fuente de sonido: CD - TUNER (sintonización) - TAPE (cinta)
Refuerzo dinámico de tonos bajos) – para reforzar los tonos bajos WHO IS COVERED?
You must have proof of purchase to exchange the product.
A sales receipt or other document showing that you
zócalo de auricular de 3,5 mm
purchased the product is considered proof of purchase.
Attach it to this owner's manual and keep both nearby.
Teclas del cassette
para interrumpir la reproducción WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
para parar la reproducción y abrir el compartimiento del cassette
For one year thereafter, a defective or inoperative product
will be replaced with a new, renewed or comparable
para avance rápido de la cinta
product at no charge to you. A replacement product is
covered only for the original warranty period.When the
para avance rápido de la cinta
warranty on the original product expires, the warranty on
para iniciar la reproducción
the replacement product also expires.
para iniciar la grabación
WHAT IS EXCLUDED?
Your warranty does not cover:
Botones de CD (disco compacto)
• labor charges for installation or setup of the product,
para iniciar o interrumpir la reproducción del CD adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
para parar la reproducción
product.
• product repair and/or part replacement because of
para buscar o saltar a una parte o una pista particular
misuse, accident, unauthorized repair or other cause not
within the control of Philips Consumer Electronics
para seleccionar un modo de reproducción distinto, por ejemplo,
Company.
SHUFFLE (mezcla) o REPEAT (repetir) y programar números de pista
• reception problems caused by signal conditions or cable
or antenna systems outside the unit.
está encendido cuando está conectada la corriente de la red • a product that requires modification or adaptation to
enable it to operate in any country other than the
para indicar las funciones de CD country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
está encendido durante la recepción de FM estéreo
• incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
Compartimiento del cassette
incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is not
para abrir la puerta del CD
limited to, prerecorded material, whether copyrighted or
not copyrighted.)
para seleccionar la banda de onda (FM-AM) • a product that is used for commercial or institutional
purposes.
para sintonizar emisoras de radio
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
Puntero del dial de sintonización
product is officially distributed by Philips Consumer
Electronics Company. In countries where Philips Consumer
Electronics Company does not distribute the product, the
PANEL TRASERO local Philips service organization will attempt to provide a
replacement product (although there may be a delay if the
appropriate product is not readily available).
para eliminar posibles silbidos durante grabaciones de AM
BEFORE REQUESTING EXCHANGE...
Please check your owner's manual before requesting an
para mejorar la recepción de FM exchange. Adjustments of the controls discussed there may
save you a trip.
enchufe para el cable de la red eléctrica
para abrir el compartimiento de la batería
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips Service Company, P.O. Box 555, Jefferson City,Tennessee 37760, (423) 475-8869
POWER SUPPLY
• So complete and return the Warranty
BATTERIES (see 1)
Registration Card enclosed with your
Whenever convenient, use the power supply if you want
purchase at once. And take advantage
to conserve battery life. Make sure you remove the
power plug from the set and wall outlet before inserting
of these important benefits.
batteries.
Batteries (optional)
Owner Model
1. Open the battery compartment and insert as shown
Confirmation Registration eight batteries, type R14, or C-cells.
2. Replace the compartment door, making sure the
Your completed Warranty Returning your Warranty
batteries are firmly and correctly in place.
Registration Card serves Registration Card right
3. Remove the batteries if exhausted or if they will not
as verification of away guarantees you'll
be used again for a long period.
ownership in the event of receive all the information
product theft or loss. and special offers which
– The incorrect use of batteries can cause electrolyte
you qualify for as the leakage and will corrode the compartment or cause
owner of your model. the batteries to burst. Therefore:
– Do not mix battery types, e.g. alkaline with zinc
carbonate.
– When inserting new batteries, replace all
For Customer Use
batteries at the same time.
symbols
Enter below the Serial No. which is
– Remove the batteries if the set is not be used for
located on the rear of the cabinet. Retain
a long time.
this information for future reference.
Note: The battery supply is switched off when the set
is connected to the power.
Model No. _______________________
Serial No. ________________________
WARNING:
TO PREVENT
FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION:
To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
MAC5097
SAFETY
OPERATION/TUNER
GENERAL OPERATION
ç Canada
1. To switch on the set, use the source selector 2
This digital apparatus does not exceed the Class B
2. Adjust the sound using the VOLUME control 1 and
limits for radio noise emissions from digital apparatus
DBB switch 3.
as set out in the Radio Interference Regulations of the
3. To switch off the set, set the source selector 2 to
Canadian Department of Communications.
TAPE/OFF position, with the cassette keys released.
TUNER (see 2 / 3)
1. Set the source selector 2 to TUNER.
2. Adjust the sound using the VOLUME control 1 and
the DBB switch 3.
3. Select the wave band using the FM-AM band
selector @.
4. Tune to a radio station using the TUNING knob #.
– For FM, pull out the telescopic antenna. To
– Read before operating equipment improve FM-reception, incline and turn the
antenna. Reduce its length if the FM-signal is too
11. Grounding or Polarization -
strong (very close to a transmitter).
Precautions that should be taken so
– For AM, the set is provided with a built-in
that the grounding or polarization
AC
means of an appliance is not defeated. antenna, so the telescopic antenna is not needed.
Polarized Plug
CAUTION:
Direct the antenna by turning the whole set.
To prevent
electric shock, match the wide blade of this plug to the wide slot,
– The FM STEREO indicator 9 lights up when you
thenfully insert. Do not use this (polarized) plug with an extension
cord, receptacle or other outlet unless the blades can be fully are receiving a FM stereo transmitter in stereo.
inserted to prevent blade exposure.
5. To switch off the set, set the source selector 2 to
12. Power-Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed TAPE/OFF position, with the cassette keys released.
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the
appliance.
13. Cleaning - The appliance should be cleaned only as recommended
by the manufacturer.
14. Power Lines - An outdoor antenna should be located away from
power lines.
15. Nonuse Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of
time.
16. Object and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through
openings.
17. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
91/8 EL 4562-1
LIMITED WARRANTY CD PLAYER
SEARCH ∞ or §
One Year Free Exchange
Selecting a different track during playback
– You can jump to the next track by pressing SEARCH
§ 6 once. If you want to skip more than one track,
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO OR U.S.VIRGIN ISLANDS... press SEARCH § 6 more than once until the
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of display shows the desired track number.
purchase enclosed, to the address listed below.
Small Product Service Center – If you want to repeat the running track from the
Philips Service Company beginning, press SEARCH ∞ 6 once. If you want to
907 Snapps Ferry Road, Plant 2, Building 6
repeat one of the previous tracks, press SEARCH ∞
Greeneville,TN 37743
(In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability 6 more than once until the display shows the
and fitness for a particular purpose, are limited in duration
desired track number.
to the duration of this express warranty. But, because some
states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
Starting with a particular track
EXCHANGING A PRODUCT IN CANADA...
1. In the STOP position you can select a desired track
Contact your dealer to arrange an exchange. Or, ship the
product, insured and freight prepaid, and with proof of using the SEARCH § or ∞ button 6.
purchase enclosed, to one of the Philips consumer service
2. Press PLAY•PAUSE 2; 6 to start playback.
centers listed below.
Philips Electronics Ltd.
601 Milner Avenue, Scarborough, Ontario, M1B 1M8
(416) 292-5161
Searching for a passage within a track
4977 Levy Street, St. Laurent, Québec, H4R 2N9
(514) 956-0120 You can search for a passage within a track. The CD is
1741 Boundary Road,Vancouver, B.C.,V5M 3Y7
(604) 294-3441 played at low volume and at high speed, however, the
(In Canada, this warranty is given in lieu of all other
sound is still recognizable.
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or 1. Keep the SEARCH ∞ or § button 6 pressed during
fitness for a particular purpose. Philips is not liable under
playback, and release the button as soon as you
any circumstances for any direct, indirect, special, incidental
or consequential damages, howsoever incurred, even if
recognize the desired passage:
notified of the possibility of such damages.)
– Normal CD playback will resume from this point.
TO GET OUT -OF-WARRANTY EXCHANGE...
In U.S.A., Puerto Rico or U.S.Virgin Islands, contact Philips
Service Company at (800) 851-8885 to obtain the cost of
SHUFFLE/REPEAT (see 5)
out-of-warranty exchange.Then carefully pack the product
and ship it to the Small Product Service Center (address
listed above). In Canada, contact the nearest Philips The MODE button 6 allows you to select four different
consumer service center (phone number and address listed
modes. The modes can be selected or changed during
above) to obtain the cost of out-of-warranty exchange.
Then carefully pack the product and ship it to that service
playback.
center.
1. During playback only, press MODE 6 until the
REMEMBER...
desired function appears on the display.
Please record the model and serial numbers found on the
product below. Also, please fill out and mail your warranty
REPEAT 1 - Continuous playback of the current
registration card promptly. It will be easier for us to notify
you if necessary. track.
REPEAT ALL - Repeats the entire CD.
MODEL # __________________________________
SHUFFLE - Tracks are played in random order.
– During playback you can use SEARCH ∞ or
SERIAL # __________________________________
SEARCH § 6 to skip tracks.
– The REPEAT mode can also be further combined
with PROGRAM.
EL4967E003 / MAC 4108 / 12-95
CASSETTE RECORDER
AC POWER CASSETTE PLAYBACK RECORDING FROM THE RADIO
1. Set the source selector 2 to TAPE. 1. Set the source selector 2 to TUNER.
1. Check if the power voltage as shown on the type
2. Press STOP•OPEN 9 / 5 to open the cassette
2. Tune to the desired radio station using the TUNING
plate (on the bottom of the set) corresponds to your
holder. knob #.
local power voltage. If it does not, consult your
3. Press STOP•OPEN 9 / 5 to open the cassette
3. Insert a recorded cassette.
dealer or service organisation.
4. Press PLAY 1 5 and playback will start.
holder.
2. Connect the power cord to the AC MAINS outlet and
5. Adjust the sound using the VOLUME 1, and DBB 3 4. Insert a blank cassette.
the wall outlet.
5. Press RECORD 0 5 to start recording.
controls.
– The set is now ready to use.
6. For brief interruptions, press PAUSE ; 5. Press 6. For brief interruptions, press PAUSE ; 5. To resume
3. To switch off the AC power supply completely, pull
PAUSE ; 5 again to resume playback. recording, press PAUSE ; 5 again.
the power plug out of the wall outlet.
7. By pressing 5 or 6 5, fast winding of the tape is 7. To stop, press STOP•OPEN 9 / 5.
– Disconnect the power cord when you change over
possible in both directions.
to battery supply, or to protect the set during
8. To stop playback, press STOP•OPEN 9 / 5. CD SYNCHRO - RECORDING FROM THE CD PLAYER
heavy thunderstorms.
– The keys are automatically released at the end of 1. Set the source selector 2 to CD.
the tape.
2. Insert a CD and if desired, program track numbers.
Environmental information 9. Set the source selector 2 to TAPE/OFF position 3. Press STOP•OPEN 9 / 5 to open the cassette
(with the cassette keys released) to switch off the holder.
All redundant packaging material has been
set.
omitted. We have done our utmost to make the 4. Insert a blank cassette.
– The power indicator goes out. 5. Press RECORD 0 5 to start recording.
packaging easily separable into three mono
– Playing of the CD program starts automatically
materials: cardboard (box), expandable polystyrene
CASSETTE RECORDING (see 6 / 7 )
(buffer) and polyethylene (bags, protective foam from the beginning of the program. It is not
sheet). General information on cassette recording necessary to start the CD player separately.
6. For brief interruptions, press PAUSE ; 5. To resume
– Recording is permissible insofar as copyright or other
rights of third parties are not infringed. recording, press PAUSE ; 5 again.
Your set consists of materials which can be
7. To stop recording press STOP•OPEN 9 / 5.
recycled if dissassembled by a specialized – This deck is not suited for recording on CHROME (IEC
company. Please observe the local II) or METAL (IEC IV) type cassettes. For recording
you should use NORMAL type cassettes (IEC I) on To select and record a particular passage within
regulations regarding the disposal of
a track
packaging materials, exhausted batteries which the tabs have not been broken.
and old equipment. – The recording level is set automatically. Altering the 1. Press SEARCH ∞ or § 6 to select a passage.
VOLUME control 1 or, DBB switch 3 will not affect 2. Put the CD player in PAUSE ; 6 position at the
the recording in progress.
selected passage.
– No recording will take place during the first 7 – Recording will start from this exact point when
Both the model and production numbers can be found on
seconds, when the leader tape passes the recorder you press RECORD 0 5.
the bottom of the set.
heads.
– To prevent the accidental erasure of a recording,
keep the cassette side to be safeguarded in front of
you and break out the left tab. Recording on this side
is no longer possible.
CD PLAYER MAINTENANCE
CD DISPLAY INDICATION (see 4) RECORDER MAINTENANCE (see 0)
PRECAUTIONS & GENERAL MAINTENANCE
– Total track number: in stop position. To ensure a good recording and playback quality, clean
(see 8 / 9)
– Current track number: during CD play. the indicated parts
– Place the set on a hard, flat surface so that it does
– ; and current track number: in PAUSE mode.
of operation or, on average, once a month. Use a cotton
not tilt.
– SHUFFLE/REPEAT mode: the respective mode is bud slightly moistened with alcohol or a special head
– Do not expose the set, CDs, batteries or cassettes to
activated. cleaning fluid.
humidity, rain, sand, direct sunlight or other places
• Press PLAY 1 5 and clean the rubber pressure
– PROG: program function is active or when you store
where high temperatures can occur, such as in the
a track. roller C.
vicinity of heating apparatus or in motor cars parked
– No display: error in CD operation or with the CD • Then press PAUSE ; 5 and clean the capstan B
in the sun.
(see Troubleshooting). and the heads A.
– Do not cover the set. The amplifier produces heat
• After cleaning, press STOP•OPEN 9 / 5.
which must dissipate freely, so make sure that there
PLAYING A CD Cleaning of the heads A can also be done by playing a
is sufficient ventilation around the set. A minimum
1. Set the source selector 2 to CD. cleaning cassette through once.
gap of 15 cm is necessary.
2. To open the CD compartment, lift the CD door on the
– The mechanical parts of the CD player and the
edge (marked LIFT TO OPEN !).
cassette deck contain self-lubricating bearings and
3. Insert the audio CD, printed side facing up.
must not be oiled or lubricated.
4. To close the CD compartment, push the door down.
– A chamois leather slightly moistened with water is
– The CD player scans the contents of the CD and sufficient for cleaning the housing. Do not use
the total number of tracks is displayed
cleaning agents containing alcohol, spirits, ammonia
5. Press PLAY•PAUSE 2; 6 to start playback.
or abrasives as these may harm the housing.
6. Adjust the sound using the VOLUME control 1 and
the DBB switch 3. CD MAINTENANCE
7. To interrupt playback, press PLAY•PAUSE 2; 6.
– The lens of the CD player should never be touched.
Press PLAY•PAUSE 2; 6 again to continue
– The lens may cloud over if the CD player is moved
playback.
from cold to warm surroundings. The CD player will
8. Press STOP 9 6 to stop CD playback.
not start. Give the player some time to acclimatise.
9. Set the source selector 2 to TAPE/OFF position to
– To take a CD out of its box, press the center spindle
switch off the set.
while lifting the CD. Always pick up the CD by the
Note: CD playback will also stop when:
edge and replace the CD back in its box after use to
– the CD has reached the end;
avoid scratching and dust.
– the CD door is opened;
– To clean the CD, wipe in a straight line from the
– the source selector is in the TUNER or
center towards the edge using a soft, lint-free cloth.
TAPE/OFF position.
Do not use cleaning agents as they may damage the
disc.
– Never write on a CD or attach stickers to it.
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.
2. To leave the SHUFFLE mode, press the MODE button
WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the
6 repeatedly until the various SHUFFLE/REPEAT
warranty.
modes are no longer shown on the display. You can
also press STOP 9 6 to quit playback.
PROBLEM POSSIBLE CAUSE
Set does not react to operation – Electrostatic discharge.
PROGRAMMING TRACK NUMBERS
of any control.
You may store at most 20 tracks in the memory in the
desired sequence.
Display does not function – Electrostatic discharge.
You may store any track more than once.
properly.
Programming track numbers
No sound. – VOLUME is not adjusted.
1. Press MODE 6 in CD stop mode
– Headphones are connected.
– The display shows 00.
2. Select the desired track using SEARCH ∞ or – Batteries are exhausted.
SEARCH § 6 until the display shows the desired – Batteries are incorrectly inserted.
– Power cord is not securely
track number.
connected.
3. Store the desired track by pressing MODE 6 once.
– The display instantly reverts back to 00.
Bad sound. – Batteries are exhausted.
4. Select and store all desired tracks of a CD in this
Severe radio hum or noise. – Set too close to TV, VCR or
way.
computer.
Poor radio reception. – Weak radio signal.
Checking a program
1. To review the set program, press MODE 6.
– The display will show the track numbers you have
selected in sequence and ends with showing 00.
2. To start playback of the program, press MODE 6 Poor cassette sound quality. – Dust and dirt on the heads,
capstan or pressure roller.
again until the display shows PROG.
3. Press PLAY•PAUSE 2; 6.
Recording does not work. – Cassette tab(s) may be broken
– Playback starts with the first track of the program.
out.
After the last track, playback stops and the display
CD playback does not work. – CD is badly scratched or dirty.
shows the CD's total number of tracks.
Note: If you have pressed MODE but have failed to
– No CD inserted.
select any tracks, CD playback will not start (see
– CD inserted upside down.
Troubleshooting)
– Laser lens is steamed up.
Erasing a program
– MODE pressed but no tracks
You can erase a program by:
selected during programming
– opening the CD door;
The CD skips tracks. – CD is damaged or dirty.
– setting the source selector 2 to the TAPE or TUNER
– PROGRAM/SHUFFLE is active.
position.
Notes
Notes
A,B and C after every 50 hours
Notes
REMEDY
• Switch off the set, disconnect the
power plug and reconnect after a
few seconds.
• Switch off the set, disconnect the
power plug and reconnect after a
few seconds.
• Adjust the VOLUME.
• Disconnect headphones.
• Insert new batteries.
• Insert the batteries correctly.
• Connect the power cord properly.
• Replace batteries.
• Increase the distance.
• FM: aim and extend the
telescopic antenna for best
reception; (see 2)
• AM: rotate the entire set (see 3).
• Clean the heads etc., see
Maintenance.
• Apply a piece of adhesive tape
over the missing tab space.
• Replace or clean the CD, see
Maintenance.
• Insert CD.
• Insert CD with printed side facing
up.
• Wait until lens has acclimatized.
• Select tracks or erase program
• Replace or clean the CD.
• Switch off the PROGRAM/-
SHUFFLE function.