Coomber 6030 Supplementary Instructions

Supplementary Instructions: Twin Drive CD Recorders
6031 model shown
ADVANCED USER MENU
MENU
Record options
Playback options*
options appear when a CD
with audio tracks has been
inserted.
†
Erase
& copy functions
erase functions are only
visible when a CD-RW with
audio tracks has been inserted.
Other settings
* All menu functions
return to their default
settings when the unit
is restarted - except for
items marked with an
asterisk * which return
to default settings when
a new CD is inserted.
Options in red are only
available on 6030/6031
models only.
†
Option appears when
a CD-RW is inserted.
Tick indicates default
selection at startup.
6030 and 6031 supplement
Automatic record level
Record level mode
Manual record level
2 mics are a stereo pair
Two microphone setup
2 mics are dual mono
High sensitivity
Microphone Sensitivity
Low sensitivity
Dual disc record mode Record to one disc only
Record to both discs
Continuous record
Fade out recording
Option available during recording. Select to provide a five
second fade-out when STOP is selected to end recording.
no repeat
Repeat options
repeat track
repeat disc
Programme
Select tracks for playing in the order of your choice.
Random
Select to play all of the tracks in a random order.
Intro
Select to play the first 5 seconds of each track, allowing
you to listen to and select a track of your choice.
Upon hearing the desired track, press the PLAY key.
Intro mode is cancelled and the track will continue to play.
Erase disc
Copy disc
Copy or splice tracks Copy tracks
Splice tracks
Speaker options Mute speakers
Select to mute/unmute speakers.
Turn PA mode on
Select for public address via mic.
Disable keypad
Keypad & remote options
Disable keypad can only be
Disable remote
deselected by restarting the unit.
Display options
Contrast
Select to adjust display contrast
using rotary control knob.
Invert
Select to invert the LCD image
from positive to negative.
Backlight Off
Select to switch off the backlight.
Show build information
Service Info
Shows information
Show drive information
about your Real Time
CD Recorder - useful info for advice or support.
SELECTING DRIVES
Which drive should I use?
You can use either CD drive for playing, recording or copying.
For simplicity, these instructions show copying from Drive A (left)
to Drive B (right).
Using the A/B key
The keypad controls whichever drive has been selected
with the A/B key. Press it to switch between drives.
COPYING CDs
Inserting CDs into different drives
On start-up, CD drive A is automatically selected. Insert the
master disc, then select drive B to insert a blank CD/R or RW.
Copying an entire CD
Important note: you can only copy entire CDs onto a blank CD!
Press the MENU key and select Copy functions > Copy disc.
?
Confirm copy
Press "copy" to make a
complete copy of the disc in
drive A to the blank disc in
drive B.
copy
When copy is selected a new screen provides information.
Copying
Copying from A to B
Remaining: 11:10
When copying is complete the LCD will display information
about the newly copied disc.
14
Drive B
The selected drive appears in the
top left hand of the LCD screen
just below the CD icon.
Follow the
instructions shown
cancel
on the LCD screen.
Copying occurs
at high speed.
You may notice a
slight increase in
noise from both CD
drives as copying
takes place.
61:07