Mounting Stand Onto The Set; Rear Connections - Philips MCM275/37B Quick Start Manual

Install

Mounting stand onto the set

1
Put MCM275 on a flat and firm surface, rear side facing up
2
As shown, align the stand to the slots at set's bottom, 4 FRONT facing
down
3
Push the stand down into the slots
Helpful hints:
- For wall mounting, please refer to the User Manual, Appendix: How to mount
your MCM275 onto Walls. You may need assistance from the qualified service
personnel.

Rear connections

1
Connect the cable of the left speaker to LEFT (red and black) and the cable
of the right speaker to RIGHT (red and black)
2
Extend the wire antenna and fit it to FM ANTENNA
3
a. Assemble the loop antenna
b. Fit the plug of the loop antenna to AM ANTENNA
4
Connect the AC power cord to the wall socket
FM wire
antenna
Speaker
(right)
AC power cord
AM loop
antenna
Speaker
(left)
AM
ANTENNA