Advertisement
Quick Links
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES.
I
MPORTANT — This Document is customer property and is to remain with this unit. Please return to service information pack
upon completion of work.
These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with
the installation. Should further information be desired or should particular problems arise which are not covered sufficiently for the
purchaser's purposes, the matter should be referred to your installing dealer or local distributor.
Note: The manufacturer recommends installing only approved matched indoor and outdoor systems. All of the manufacture's split
systems are AHRI rated only with TXV/EEV indoor systems. Some of the benefits of installing approved matched indoor and out-
door split systems are maximum efficiency, optimum performance and the best overall system reliability.
Models
BAYSQRD001AB
BAYSQRD002AB
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and train-
ing. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious in-
jury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels
that are attached to the equipment.
Installer's Guide
Square to Round Adaptor Kit
WARNING
s
!
18-HE79D1-1C-EN
Advertisement
Summary of Contents for Trane BAYSQRD001AB
- Page 1 AHRI rated only with TXV/EEV indoor systems. Some of the benefits of installing approved matched indoor and out- door split systems are maximum efficiency, optimum performance and the best overall system reliability. Models BAYSQRD001AB BAYSQRD002AB WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and train- ing.
-
Page 2: Kit Contents
Installer's Guide Safety Section WARNING HAZARDOUS VOLTAGE! Failure to follow this Warning could result in property damage, severe personal injury, or death. Disconnect all electric power, including remote discon- nects before servicing. Follow proper lockout/tagout procedures to ensure the power cannot be inadver- tently energized. - Page 3 Secure with sheet metal screws. See Figure 2. For use with medium 12 cabinet *****042-60 Models - Follow instructions above but leave a 4-1/2” gap. See Figure 2. INSTALL NOTE BAYSQRD001AB 1” AS ABOVE BAYSQRD002AB 4- 1/2” LONGER 20.92” SIDE TOP/BOTTOM 5.
- Page 4 6. Connect field supplied flex duct to the adaptors and secure with field supplied clamps. See Figure 5 for dimensional drawings for flexduct sizing. Figure 5. Dimensional Drawing BAYSQRD001AB Dimensions (For use on *****018-036 Units) Note: Flexduct size is 16”...