Table of Contents
Advertisement
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
The unit is designed for use with a specific voltage only. Connection to another voltage than
specified in this User's Manual may cause fire, electric shock, or equipment damage.
Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
Do not place the cord underneath the unit or other heavy objects.
Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric
shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit
securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in injury or equipment damage.
When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a
damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same
screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
Advertisement
Table of Contents
