This menu allows you to set the display
resolution of the High Defi nition A/V Receiver
along with the compatible video format setting
and picture setup.
[Video format]
There are 2 options under Video format –
[Display resolution] and [Video format]. To
access these 2 options, press B while at the
[Video format] line menu item.
•
[Display resolution]
– The High Defi nition
A/V Receiver has the excellent ability to
upconvert standard video defi nition
contents to high defi nition video signal.
Depending upon your TV/Monitor’s
resolution capabilities, select the applicable
resolution settings – [Auto], [576i], [576p],
[720p], [1080i] and [1080p.
When [Auto] is selected, the High
Defi nition A/V Receiver automatically
selects the appropriate TV resolution. Note
that if the display is connected to
Composite or S-Video Monitor Out, the
video output resolution must be set to
[480i] or [576i] to view content.
•
[Video format]
– Depending upon your
area, select either [24 Hz] (for Blu Ray
player), [50 Hz] (normally for Europe) or
[60
[Normal] or [Custom]. While at [Video
modes] menu item, select [Normal] to retain
the default picture setup settings. If you would
like to further improve the picture settings or
adjust the parametres according to your
preference, set [Video modes] to [Custom].
The following parametres can be adjusted.
•
[Brightness]
– Adjust overall brightness of
the picture.
EN
Page 35